Alternatives and similar repositories for yarrboard

Users that are interested in yarrboard are comparing it to the libraries listed below

• jiauka / NMEA2000_esp32xx
  ☆12Updated last year
• kolins-cz / Smart-BMS-Bluetooth-ESP32
  Program to read out and display data from xiaoxiang Smart BMS over Bluetooth Low Energy
  ☆117Updated last year
• hatlabs / SH-ESP32-nmea2000-gateway
  An Actisense NGT-1 compatible NMEA 2000 USB gateway for the SH-ESP32
  ☆32Updated 2 years ago
• SignalK / SensESP
  Universal Signal K sensor framework for the ESP32 platform
  ☆186Updated 3 months ago
• wellenvogel / esp32-nmea2000
  nmea2000 gateway with ESP32
  ☆85Updated last month
• cterwilliger / VeDirectFrameHandler
  ☆30Updated 3 years ago
• AK-Homberger / NMEA2000WifiGateway-with-ESP32
  This repository shows how to build a NMEA2000 WiFi Gateway with voltage and temperature alarms.
  ☆88Updated 3 years ago
• AK-Homberger / NMEA2000-Data-Sender
  To measure battery voltage, engine RPM, fuel level and exhaust teperature with an ESP32 and send it to a NMEA 2000 network.
  ☆65Updated 3 years ago
• softwarecrash / Daly2MQTT
  ESP8266 Connector to get Daly / XENES / HI-BMS / BullTron BMS Data into MQTT systems
  ☆174Updated 2 months ago
• mrbubble62 / BatteryMonitor
  NMEA 2000 style CAN battery monitor
  ☆11Updated 8 years ago
• loopyengineeringco / Daly2Sofar
  ESP32 bridge allowing Daly Smart BMS to be used with a Sofar inverter/charger (and others that use SMA CANBUS protocol).
  ☆33Updated last year
• winginitau / VictronVEDirectArduino
  Lightweight arduino library to read basic data using the VE.Direct protocol from Victron Energy
  ☆95Updated 2 years ago
• ArminJo / JK-BMSToPylontechCAN
  Converts the JK-BMS RS485 data to Pylontech CAN data
  ☆97Updated 7 months ago
• ttlappalainen / NMEA2000_esp32
  Inherited object for use NMEA2000 with ESP32 boards
  ☆88Updated last year
• AK-Homberger / NMEA2000-Workshop
  Material für den NMEA2000-Workshop.
  ☆47Updated 4 months ago
• dreadnought / python-daly-bms
  Python module for Daly BMS devices
  ☆102Updated last year
• vagueDirector / ArduinoXiaoxiangSmartBMSDisplay
  Program for reading data from a Xiaoxiang smart BMS and printing to an OLED display
  ☆21Updated 5 years ago
• neilsheps / overkill-xiaoxiang-jbd-bms-ble-reader
  Read Xiaoxiang BMS data through BLE on Adafruit nrf52 devices
  ☆24Updated 3 years ago
• maxx-ukoo / jk-bms2pylontech
  JK BMS to PYLON CANBUS Protocol converter
  ☆40Updated 3 years ago
• bareboat-necessities / bbn-m5stack-tough
  M5Stack Tough (ESP-32) Sailing Instruments Display and Autopilot Control
  ☆119Updated 8 months ago
• physee / Victron.Arduino-ESP8266
  Code to read the VE.Direct-Protocol from serial into a value array. Uses a non-blocking read loop and does checksum verification before a…
  ☆130Updated 4 years ago
• Techstyleuk / SensESP_3_Battery_Monitor
  SensESP setup for monitoring 3 boat batteries
  ☆21Updated 6 months ago
• syssi / esphome-jbd-bms
  ESPHome component to monitor and control a Xiaoxiang Battery Management System (JBD-BMS) via UART-TTL or BLE
  ☆186Updated 2 weeks ago
• nickn17 / evDash
  EV dashboard - software for small dev boards connected to the car via obd2 BLE4 or CAN bus.
  ☆155Updated 3 months ago
• sharandac / powermeter
  A very flexible ESP32 power meter / energy meter with SCT-013-0x0, ZMPT101B, ACS712 sensors
  ☆45Updated 2 years ago
• hatlabs / SH-ESP32-hardware
  Sailor Hat for ESP32 hardware
  ☆48Updated last year
• jcable / nmea-link
  esp8266 wifi-serial bridge with line oriented buffering optimised for NMEA-0183 applications
  ☆15Updated last year
• harihanv / esp32-modbus-gateway
  esp32 port of modbus RTU to TCP Arduino gateway
  ☆70Updated 4 years ago
• AK-Homberger / M5Stack-NMEA-2000-Display-CAN-BUS
  This repository shows how to use the M5Stack as NMEA 2000 Display and WiFi Gateway.
  ☆42Updated 3 years ago
• softwarecrash / EPEver2MQTT
  ESP82XX based connector for EPEver Solar tracker systems, control and watch Multiple devices over webinterface and MQTT
  ☆60Updated 2 months ago