Alternatives and similar repositories for EBC-controller

Users that are interested in EBC-controller are comparing it to the libraries listed below

• JOGAsoft / EBC-controller
  A linux software to control ZTE Tech EBC A-series battery testers and electronic loads
  ☆29Updated 2 years ago
• flip555 / bms_connector
  BMS Connector Integration for Home Assistant
  ☆13Updated last year
• darwinbeing / HPServerPSUHack
  HP HSTNS-PL11/PL30/PL42 Server PSU Modification for Vehicle Flashing and Programming
  ☆81Updated 3 weeks ago
• af3556 / UT210E
  Information gathered on the Uni-T UT210E multimeter.
  ☆162Updated 2 years ago
• the6p4c / Flatpack2
  Software, hardware and protocol information for the Eltek Flatpack2.
  ☆50Updated 6 years ago
• cskilbeck / modbus
  ☆16Updated 2 years ago
• craigpeacock / Huawei_R4850G2_CAN
  Example code to communicate with Huawei R4850G2 Power Supply via CAN
  ☆74Updated last year
• misdoro / Electronic_load_px100
  150W Electronic load / Battery discharge capacity tester PX-100 v2.70 protocol and control software. May be compatible with some DL24 ver…
  ☆122Updated 11 months ago
• wildekek / rdtech-firmware-unisoft
  ☆53Updated 3 months ago
• Lyve1981 / GrowattUsbModbus
  Growatt ModBus => MQTT translation service
  ☆24Updated last year
• morgendagen / riden-dongle
  An alternative firmware for the Riden WiFi module that provides Modbus TCP and SCPI support as well as a web interface.
  ☆25Updated 2 months ago
• raplin / DPS-1200FB
  Python code to read status from the DPS-1200FB power supply
  ☆137Updated 7 years ago
• mnh-jansson / open-battery-information
  ☆331Updated last week
• openhp / HeatPumpController
  The Valden Heat Pump controller is a platform to precisely control heat pumps
  ☆140Updated 3 years ago
• NEEY-electronic / JK
  ☆64Updated 3 years ago
• sshoecraft / jbdtool
  JBD BMS Linux utility
  ☆66Updated 2 months ago
• juamiso / PYLON_EMU
  Python script to emulate the outgoing CAN bus traffic from a Pylontech LFP battery pack (48V)
  ☆44Updated 4 years ago
• clytle374 / Open-T12-Soldering-Station
  This is a clone of the cheap T12 soldering stations, attempting to eliminate the shortfalls of the cheap designs.
  ☆23Updated 10 months ago
• syssi / esphome-jk-bms
  ESPHome component to monitor and control a Jikong Battery Management System (JK-BMS) via UART-TTL or BLE
  ☆725Updated last week
• Gissio / radpro
  Custom firmware for Geiger counters/radiation meters (FS2011, Bosean FS-600, FS-1000, FS-5000, FNIRSI GC-01)
  ☆328Updated 3 weeks ago
• tjko / riden-flashtool
  Riden RD6006 Firmware Update Flash Tool
  ☆80Updated last month
• msillano / RD6006-Super-power-supply
  A intelligent Power supply with micro control and logging, for very long test (battery cycles)
  ☆72Updated 5 years ago
• dalathegreat / Nissan-LEAF-Battery-Upgrade
  Software and guides for upgrading LEAFs to bigger and newer batteries
  ☆299Updated 2 months ago
• syssi / esphome-jbd-bms
  ESPHome component to monitor and control a Xiaoxiang Battery Management System (JBD-BMS) via UART-TTL or BLE
  ☆169Updated last week
• wildekek / rdtech-esphome
  Add Home Assistant support to your RDTech power supply
  ☆49Updated 4 months ago
• Frankkkkk / python-pylontech
  Python lib to talk to pylontech lithium batteries 🔋 (US2000, US3000, ...) using RS485
  ☆80Updated 2 years ago
• botaneta / JKbms_Emu_Pylon
  Emulación del protocolo CANBUS de Pylontech, para comunicación con inversores fotovoltaicos, usando un ESP32
  ☆12Updated 4 months ago
• maxx-ukoo / jk-bms2pylontech
  JK BMS to PYLON CANBUS Protocol converter
  ☆36Updated 2 years ago
• odya / esphome-smart-battery
  Monitor and control DYI smart battery using JBD BMS, external balancer & usb charger control, environment sensors and display.
  ☆15Updated last year
• zelea2 / rigol_vendor_bin
  ☆156Updated 8 months ago