Alternatives and similar repositories for Multi-channel-wireless-voltmeter:

Users that are interested in Multi-channel-wireless-voltmeter are comparing it to the libraries listed below

• alunmorris / Multi-channel-autorange-OLED-voltmeter
  Minimalist 4-channel 0 to 27V meter using AVR microcontroller and 72x40 OLED display
  ☆19Updated 9 months ago
• upiir / 1602_oled_character_display
  Simple design for 16x2 OLED Character Display using the US2066 chip
  ☆11Updated last year
• bytesizedengineering / mppt-charge-controller
  ☆11Updated last month
• wagiminator / ATtiny13-TinyRemoteXL
  12-Button IR Remote Control
  ☆44Updated 2 years ago
• wagiminator / ATtiny13-TinyProbe
  Simple Logic Probe
  ☆40Updated 2 years ago
• sgmne / AnalogKeypad
  Simplified design of an analog keypad matrix interface and demo thereof
  ☆16Updated 3 years ago
• gavinlyonsrepo / Cap_meter_arduino
  Capacitance meter, Arduino-based, three tests , range 18pf to 4F , Push Button input , OLED and serial monitor output.
  ☆16Updated last year
• mike-rankin / ESP32_BLE_Xaiomi
  ☆13Updated 4 years ago
• ruenahcmohr / SVGControlPanel
  esp8266 controller based on SVG with embedded links
  ☆10Updated 3 years ago
• bertrik / ElectronicLoad
  Arduino software for an electronically controlled load, based on a STM32 microcontroller
  ☆21Updated 4 years ago
• JeremySCook / clock742
  Clock 742 is a clock made with a PCB diffuser
  ☆16Updated 2 years ago
• baldengineer / Open-Vapors
  Open Source Reflow Oven Controller.
  ☆19Updated 3 years ago
• computingthebishop / ReflowOven
  ☆13Updated 4 years ago
• jrsikken / ElectronicLoadR2
  Hardware of Jasper's Electronic Load R2
  ☆21Updated 6 years ago
• phishman / TCA8418
  TCA8418 I2C Keypad Controller Arduino Library
  ☆16Updated 6 years ago
• jrsikken / ElectronicLoadR3
  Hardware of Jasper's Electronic Load R3
  ☆25Updated 6 years ago
• serisman / pdk-continuity-tester
  A simple standalone continuity tester, based on the ultra-inexpensive Padauk microcontrollers and a piezo buzzer.
  ☆12Updated 2 years ago
• limpkin / xt60_parallelizer
  a custom board to monitor custom battery packs
  ☆16Updated 9 months ago
• dragon-engineer / QN8027
  QN8027 Single-Chip FM RDS Transmitter Arduino Library
  ☆23Updated 5 years ago
• technoblogy / continuity-tester
  A simple continuity tester, based on an ATtiny85 and a piezo buzzer.
  ☆18Updated 7 years ago
• cpldcpu / USBasp-t
  USBasp for ATtiny85
  ☆33Updated 2 years ago
• arturo182 / serpente_hw
  ☆35Updated 5 years ago
• ivpri / mecrisp_pillserial
  Two/three USB-to-serial bridges with build in Forth for STM32F103
  ☆11Updated 5 years ago
• wagiminator / ATtiny814-Power-Analyzer
  Power Supply Analyzer with USB Interface
  ☆50Updated 2 years ago
• RaD / SolderPaste14M2
  Solder Paste Dispenser
  ☆18Updated 10 years ago
• dilshan / usb-external-display
  USB 10 digit seven segment display unit
  ☆14Updated 5 years ago
• hwreverse / MorphESP240_Shields
  HWR0's Shield Designs for the MorphESP 240 by @ccadic
  ☆12Updated 3 years ago
• SyedTahmidMahbub / q-dpico_picprog72
  Quick and dirty PIC16F72 programmer using the Raspberry Pi Pico and MicroPython
  ☆32Updated last year
• smdprutser / SWM050
  ☆19Updated 6 years ago
• s54mtb / lora_breakout
  Breakout board for LoRa all-in-one module CMWX1ZZABZ
  ☆12Updated 4 years ago