Alternatives and similar repositories for Raspberry-Breadstick:

Users that are interested in Raspberry-Breadstick are comparing it to the libraries listed below

• meatpiHQ / meatpi_ollie_v2
  ☆35Updated last year
• eeucalyptus / ch32v003-usbpd
  Use the ch32v003 as a usb pd controller
  ☆38Updated 9 months ago
• adafruit / M.2
  Discussion, files, spec, and more for a M.2 standard for makers
  ☆33Updated 4 years ago
• trebisky / esp32
  ESP32 projects
  ☆29Updated 6 years ago
• femtoduino / bomu-hardware
  Bluetooth "TOMU" board
  ☆15Updated last year
• Inne-Lemstra / soft_soldering_jig
  Circuit sculpture jig consisting of a vacuum pump attached to a silicone pad to keep rods and SMD components in place when soldering them…
  ☆19Updated 4 years ago
• Breadstick-Innovations / M4-Breadstick
  A long and thin development board, designed to keep the number and length of jumper wires to a minimum. Runs Circuit Python on Microchip …
  ☆14Updated last year
• CGrassin / kicad-auto-silkscreen
  This KiCad plugin automatically calculate the optimal silkscreen placement of reference designators.
  ☆22Updated 2 years ago
• TobleMiner / M.2-NVMe-SSD-to-miniPCIe-adapter
  A simple M.2 NVMe to miniPCIe adapter
  ☆24Updated last year
• kbob / icebreaker-synth
  A simple (audio) synthesizer on the iCEBreaker FPGA.
  ☆25Updated 5 years ago
• cuplsensor / cupltag
  cupl Tag Firmware and Hardware
  ☆15Updated 2 years ago
• martijnvwezel / pico-probe-programmer
  The pico can be used to program other devices. Raspberry pi made such an effort. However there is no board yet, that is open-source and c…
  ☆26Updated 2 years ago
• diminDDL / IR-Py-Thermal
  Python Thermal Camera Library
  ☆56Updated last month
• dupontgu / scopin-sans-typeface
  Fully generated typeface that makes text look like it is being viewed as serial data on an oscilloscope
  ☆71Updated last year
• gsteiert / pico-dirty-blaster-workshop
  Files and documentation for Pico-Dirty-Blaster Workshop
  ☆17Updated 9 months ago
• gregdavill / CH32V003-makefile-example
  CH32V003 is an ultra-cheap RISC-V MCU with 2KB SRAM, 16KB flash, and up to 18 GPIOs
  ☆16Updated 2 years ago
• kbeckmann / uart-audio
  Audio out with an FTDI UART cable
  ☆43Updated 4 years ago
• gsuberland / github_kicad_footprint_preview_tampermonkey
  Userscript for Tampermonkey that shows graphical previews of KiCad footprints on GitHub.
  ☆45Updated 3 years ago
• amaranth-lang / template-fpga
  Template repository for getting started with general Amaranth FPGA projects
  ☆16Updated 9 months ago
• gojimmypi / wolfssh
  wolfSSH is a small, fast, portable SSH implementation, including support for SCP and SFTP.
  ☆55Updated last month
• perigoso / freeconnect
  Freeconnect is a collection of In-circuit connectors with open source design files and documentation.
  ☆12Updated 3 years ago
• arturo182 / tinyuf2
  An open source cross-platform UF2 bootloader based on the TinyUSB library
  ☆27Updated 4 years ago
• will127534 / PCIe3_Hub
  A opensource PCIe 3.0 Hub design based on ASM2806 with Raspberry Pi 5's PCIe FPC connector design
  ☆53Updated 4 months ago
• QuickLogic-Corp / qomu-dev-board
  100% open source dev kit for EOS S3 MCU+eFPGA SoC supported by fully open source SDK and FPGA Toolchain
  ☆36Updated 4 years ago
• limpkin / xt60_parallelizer
  a custom board to monitor custom battery packs
  ☆16Updated 10 months ago
• alvarop / usb_c_power
  ☆13Updated 4 years ago
• DangerousPrototypes / Sick_of_Beige
  ☆28Updated 9 years ago
• CRImier / HaD_talking_pd
  "Talking PD" article code repository
  ☆13Updated last year
• esden / KiBus
  KiCad bus length matching script.
  ☆30Updated 9 months ago
• mattvenn / vga_clock_pcb
  Open source hardware down to the chip level!
  ☆30Updated 3 years ago