Alternatives and similar repositories for pyedbglib:

Users that are interested in pyedbglib are comparing it to the libraries listed below

• kprasadvnsi / ch55x_bare_metal
  Simple peripheral library for CH55x microcontrolles
  ☆16Updated 4 years ago
• ClusterM / clujtag-client
  Client for JTAG programmer for AVR microcontrollers
  ☆15Updated last year
• douggilliland / Design_A_CPU
  Design a CPU in VHDL
  ☆11Updated 3 years ago
• Wren6991 / DVI-PMOD
  DVI PMOD adapter (HDMI connector)
  ☆28Updated 4 years ago
• roybaer / sduino_uno
  A development board with STM8S105K6 MCU in Arduino UNO form factor
  ☆18Updated 7 years ago
• lundmar / riscv-gd32vf103-demo
  Simple demo firmware for the RISC-V GD32VF103
  ☆29Updated 4 years ago
• blackmesalabs / s7_mini_fpga
  Example designs for the Spartan7 "S7 Mini" FPGA board
  ☆28Updated 5 years ago
• dan-rodrigues / pico-hx
  PCB combining Raspberry Pi Pico and iCE40 FPGA
  ☆32Updated last year
• mithro / fx2-ftdi-emulation
  Firmware for the FX2 which emulates the FTDI serial chips (including MPSSE support).
  ☆13Updated 6 years ago
• mikeroyal / CPLD-Guide
  Complex Programmable Logic Device (CPLD) Guide
  ☆48Updated 3 years ago
• ClusterM / clujtag-avr
  Simple JTAG programmer for AVR microcontrollers with hardware USB
  ☆20Updated last year
• DavidJRichards / QMTECH_XC7A100T_Wukong_Board
  Board definition files and initial example programs
  ☆13Updated 3 years ago
• gregdavill / CH32V003-makefile-example
  CH32V003 is an ultra-cheap RISC-V MCU with 2KB SRAM, 16KB flash, and up to 18 GPIOs
  ☆16Updated 2 years ago
• iliasam / fake86_to_stm32f429_port
  8086 PC (x86) emulator for STM32F429 MCU
  ☆30Updated 2 years ago
• steieio / pico-dirty-blaster
  Collection of Raspberry Pi Pico board adapters for use with Pico-DirtyJTAG
  ☆13Updated 11 months ago
• ataradov / vcp
  A collection of Virtual COM-Port implementations
  ☆24Updated 2 years ago
• mvirkkunen / dwprog
  Program AVR devices with debugWIRE over just the RESET pin.
  ☆16Updated 5 years ago
• gtjennings1 / UPDuino-LH154Q01-Display
  Design to connect Lattice Ultraplus FPGA to LH154Q01 Display
  ☆28Updated 6 years ago
• tomverbeure / jtag_uart_example
  Mini CPU design with JTAG UART support
  ☆20Updated 3 years ago
• riktw / tang4Kramblings
  ☆21Updated 3 years ago
• mattvenn / ws2812-core
  verilog core for ws2812 leds
  ☆32Updated 3 years ago
• emard / ulx3s-bin
  Quickstart binaries for flashing ULX3S to factory-default state
  ☆25Updated 3 years ago
• ORSoC / libxsvf
  Lib(X)SVF - A library for implementing SVF and XSVF JTAG players, forked from http://svn.clifford.at/libxsvf/
  ☆24Updated 11 years ago
• cjacker / wchlinke-mode-switch
  Deprecated, use 'wlink' instead. Command line tool to switch WCH-LinkE modes between DAP and RV from host.
  ☆10Updated 5 months ago
• Fabien-Chouteau / Ada-PicoRV32-example
  Example of Ada code running on the PicoRV32 RISC-V CPU for FPGA
  ☆16Updated 6 years ago
• alxvasilev / stm32
  Easy to use STM32 development environment based on opensource tools
  ☆14Updated 2 years ago
• wd5gnr / verifla
  Fork of OpenVeriFla - FPGA debugging logic analyzer to use with your designs - examples (so far) for ice40/IceStorm
  ☆33Updated 6 years ago
• zf3 / some-tang-nano-9k-examples
  Code examples for Sipeed Tang Nano 9K FPGA board including HDMI 720p and PSRAM controller usage.
  ☆16Updated 2 years ago
• mkvenkit / humble_ice
  A low cost FPGA development board based on Lattice iCE40UP5k and Raspberry Pi RP2040.
  ☆42Updated 2 years ago
• jmaselbas / wch-isp
  mirror of https://sr.ht/~jmaselbas/wch-isp/
  ☆22Updated 9 months ago