Alternatives and similar repositories for TDC1000:

Users that are interested in TDC1000 are comparing it to the libraries listed below

• MR-DOS / MWGEN-G1
  12.5 MHz - 6400 MHz (LMX2572) or even up to 20 GHz (LMX2595) generator board with int./ext. reference.
  ☆14Updated 3 years ago
• aewallin / One-Inch-Photodetector
  Photodiode transimpedance amplifier, on a one inch diameter circular PCB
  ☆16Updated 9 months ago
• Open-RFlab / octave-openems-hll
  openEMS High-level layer
  ☆17Updated 2 years ago
• circuitvalley / LM399_Voltage_reference
  Simple LM399 Voltage Reference board
  ☆16Updated 3 weeks ago
• ageppert / Core-64-Interactive-Core-Memory-Badge
  64 bits of core memory and LEDs to interact with directly using a magnetic wand.
  ☆15Updated 3 weeks ago
• grosdode / PCB-design
  This is a checklist for PCB design. I would suggest to read it before starting a new project and a second time before ordering the PCBs. …
  ☆47Updated 2 years ago
• Yveaux / TDC7200
  Arduino library for the Texas Instruments TDC7200 Time-to-Digital Converter for Time-of-Flight Applications in LIDAR, Magnetostrictive an…
  ☆15Updated 6 years ago
• Blue-Smoke-Electronics / Ember
  ☆16Updated 6 months ago
• joseluu / D6_firmware
  Firmware for the D6 Simple spectrum analyzer with tracking source (T.G.)
  ☆23Updated 4 years ago
• AI6YP / BG7TBL-RF-USB
  USB RF Signal Generator / Spectrum Analyzer
  ☆21Updated 2 years ago
• lynaghk / calipertron
  ☆20Updated 2 months ago
• tvelliott / jPCBSim
  Front-end and post processing software for simulating planar RF filters and antennas with the openEMS FDTD field solver.
  ☆26Updated 6 years ago
• Steffen-W / KiCad-Parasitics
  KiCad plugin to determine the parasitic properties of the printed tracks in the PCB layout.
  ☆32Updated 6 months ago
• dc-power-supply / dc-power-supply
  OSHW DC power supply
  ☆26Updated 3 years ago
• SYZYGYfpga / pcb-templates
  Template PCB's for SYZYGY board designs
  ☆20Updated 2 years ago
• JosephEoff / Rodriguez
  A current/voltage tracer for semiconductors using very simple hardware.
  ☆14Updated 3 years ago
• RobertGawron / SemiconductorRadioactivityDetector
  Nuclear radiation sensor with photodiode as a detector. Photodiode doesn't require high voltages as GM tubes do. Smaller size makes bette…
  ☆25Updated 4 months ago
• thomasdob / tdstatv3
  A USB-controlled potentiostat/galvanostat for thin-film battery characterization
  ☆18Updated 2 years ago
• loxodes / emc_tools
  experimental open hardware e-field and h-field probes and LISN
  ☆25Updated 2 years ago
• jankae / Signalgenerator
  5MHz to 2.1GHz RF Synthesizer with modulation capability
  ☆41Updated last year
• MR-DOS / TDR-avalanche
  Avalanche pulser for use as TDR core
  ☆10Updated 3 years ago
• Protocentral / protocentral_sensything
  Sensything is an ESP32-based IoT device that has multiple sensor interfaces to read from and send data from both analog and digital senso…
  ☆19Updated 5 years ago
• limpkin / xt60_parallelizer
  a custom board to monitor custom battery packs
  ☆16Updated 8 months ago
• dkramnik / Eagle-Public
  Main EAGLE PCB design file repo.
  ☆15Updated 3 years ago
• mathiashelsen / agipibi
  Agipibi - An Arduino to GPIB Interface
  ☆34Updated 11 years ago
• jankae / SpectrumAnalyzer
  It started as some general experiments with RF stuff and gradually evolved into a (severely limited) spectrum analyzer.
  ☆38Updated 5 years ago
• arduino-libraries / Arduino_UnifiedStorage
  Read and write files to flash, USB mass storage and SD cards in a unified way.
  ☆12Updated 3 months ago
• QuickLogic-Corp / qomu-dev-board
  100% open source dev kit for EOS S3 MCU+eFPGA SoC supported by fully open source SDK and FPGA Toolchain
  ☆34Updated 3 years ago
• ThomasVDD / SmartSupplyMini
  ☆15Updated 6 years ago
• CarlosGS / Open-Radiation-Detector
  Portable radiation detector based on an ionization chamber
  ☆63Updated last year