SdtElectronics / Xassette-AsteriskLinks
Evaluation board for AllWinner's RISC-V 64 SoC F133/D1s
☆213Updated 3 years ago
Alternatives and similar repositories for Xassette-Asterisk
Users that are interested in Xassette-Asterisk are comparing it to the libraries listed below
Sorting:
- Buildroot Package for F1C100s/200s☆184Updated last year
- The datasheet/SDK/HDK docmentation of Bluetooth LE RISC-V MCU CH582M/CH583M☆152Updated 3 weeks ago
- Including the SDK、HDK、Datasheet of RISC-V MCU CH32V307 and other relevant development materials☆429Updated last month
- Rust-based Command Line Tool for WCH MCU USB-ISP Programming☆225Updated 4 months ago
- Buildroot Package Mainly for YuzukiHD Devices. Support Allwinner F1C100s/200s V3s V3x D1-H D1s T113 H616 BSP and Mainline☆172Updated last year
- Single-chip solution for Hi-speed USB2.0(480Mbps) JTAG/SPI Debugger based on RISC-V MCU CH32V30x/CH32V20x☆109Updated 2 years ago
- CH55x USB to JTAG bridge☆132Updated 2 months ago
- SyterKit is a baremetal framework, As bootloader, MPU framework, Running on SRAM☆116Updated last month
- An open source WCH-Link library/command line tool written in Rust.☆224Updated 5 months ago
- RV-Debugger-BL702 Project, an opensource debugger implement☆199Updated 7 months ago
- Kicad Library for ICs from WCH☆224Updated last year
- ☆129Updated last year
- Tiny FEL tools for allwinner SOC, support RISC-V D1 chip☆265Updated last month
- CH554 software development kit for SDCC☆314Updated last year
- Original GD32VF103 Firmware Library☆133Updated 2 years ago
- Datasheets and Reference Manual for BL602/BL808☆149Updated 2 years ago
- USB to dual UART / SPI / I2C / JTAG / FIFO / Bit-Bang...☆138Updated 2 years ago
- An open sourced python tool for flashing WCH CH55x series USB microcontroller with bootloader v2.30, v2.31 & v2.40.☆160Updated last year
- Config files for full Lichee Pi Nano Linux image build☆119Updated last year
- CH552 Dual USB to Serial Bridge.☆78Updated 9 months ago
- Puya PY32F002A PY32F003 PY32F030 GNU GCC SDK, template and examples☆215Updated last month
- CH32V203 is an industrial-grade enhanced low-power,small-medium capacity general-purpose MCU based on 32-bit RISC-V core☆104Updated 6 months ago
- GD32V: development platform for PlatformIO☆186Updated 2 years ago
- CH32V003 is an ultra-cheap RISC-V MCU with 2KB SRAM, 16KB flash, and up to 18 GPIOs that sells for under $0.10☆451Updated 2 months ago
- An ISP flashing tool for the WCH CH55x, CH579, CH32F103 under linux☆64Updated 6 months ago
- small linux bootloader for Allwinner T113-S3 and V851s☆90Updated 6 months ago
- BouffaloSDK is the IOT and MCU software development kit provided by the Bouffalo Lab Team, supports all the series of Bouffalo chips. Als…☆402Updated last month
- An Open-Source CMSIS-DAP Debug Probe based on DAPLink and USB bus convert and it can realize USB convert to serial interface based in CH5…☆94Updated 9 months ago
- Open-source CH55x flashing tool, SDK....☆151Updated 2 years ago
- A C++ utility that converts EasyEDA (LCEDA) file to KiCad 5 Documents.☆144Updated last year