Alternatives and similar repositories for gcode-cmm:

Users that are interested in gcode-cmm are comparing it to the libraries listed below

• kachurovskiy / nanoels
  Electronic Lead Screw for metal lathe
  ☆211Updated 3 weeks ago
• hobbymachinist / els
  Electronic Leadscrew For Lathe
  ☆61Updated last year
• grblHAL / RP2040
  grblHAL driver for RP2040/RP2350 (Pi Pico, Pi Pico2 etc)
  ☆133Updated this week
• zapta / simple_stepper_motor_analyzer
  A DYI stepper motor analyzer. This is a new design that is based on Raspberry Pi Pico and users a compact single PCB design. NOTE: The l…
  ☆151Updated last year
• mfx-inria / curvislicer
  CurviSlicer: Slightly curved slicing for 3-axis printers
  ☆228Updated this week
• kachurovskiy / megaels
  Metal lathe electronic lead screw project built on top of Russian-speaking DigitalFeed ELS system by Oleg A. and contributors from ChipMa…
  ☆52Updated 2 years ago
• grblHAL / drivers
  Driver overview
  ☆34Updated last month
• kachurovskiy / lathecode
  Text format for lathe parts and other objects with circular symmetry
  ☆21Updated last week
• CAP1Sup / Intellistep
  A rework of the terribly coded firmware from the BTT S42B v2 boards
  ☆45Updated 5 months ago
• 0x23 / open-air-bearings
  Techniques and software to build, design and simulate air bearings
  ☆41Updated 6 months ago
• G-EDM / G-EDM-v1-deprecated
  The G-EDM is a 4in1 electrical discharge machine that supports sinker EDM, EDM engraving, EDM drilling and Wire EDM operations. In the fu…
  ☆49Updated 7 months ago
• Matthias-Wandel / caliper-interface
  Connecting cheap digital calipers to Raspberry Pi and decode readings
  ☆109Updated 3 weeks ago
• CNCKitchen / GCodeBending
  Phython Script to bend GCode
  ☆65Updated 3 years ago
• grblHAL / Controllers
  List of controllers supported by grblHAL
  ☆41Updated 2 weeks ago
• bhowiebkr / laser-level-webcam
  A tool for measuring height in microns of arbitrary sized objects using a webcam and a laser level.
  ☆155Updated 11 months ago
• ccomito1223 / ELS-Jon
  Electronic Lead Screw - By Jon Bryan
  ☆20Updated 4 years ago
• opulo-inc / paste-extruder
  Paste extruder head for the LumenPnP
  ☆37Updated 2 months ago
• zapta / legacy_stepper_motor_analyzer
  A DYI minimalist hardware stepper motor analyzer with graphical touch screen.
  ☆161Updated last year
• grblHAL / plugins
  Plugins overview
  ☆26Updated last month
• FiCacador / Tlaser
  Laser engraver designed around a coreXY cantilever motion system.
  ☆37Updated 5 years ago
• kingoflolz / linear-actuator-hardware
  ☆60Updated 2 years ago
• vvega007 / Spiral-extruder
  Hub of parts for the spiral extruder
  ☆85Updated 3 years ago
• opengalvo / OPAL
  Minimalistic FW for Processing GCode to Galvanometer signals
  ☆86Updated 5 months ago
• zapta / ble_stepper_motor_analyzer
  A low cost stepper motor analyzer that uses wireless BLE link to display the data in real time on a Windows/Mac/Linux PC.
  ☆50Updated last year
• 0x23 / QuietAirCompressor
  A small and quiet air compressor design using 3D printed parts where possible.
  ☆60Updated last year
• scottalford75 / Remora
  Remora is a free, opensource LinuxCNC component and Programmable Realtime Unit (PRU) firmware to allow LPC176x and STM32F4 micro-controll…
  ☆147Updated 2 months ago
• grblHAL / iMXRT1062
  grblHAL driver for NXP iMXRT1062 (Teensy 4.x)
  ☆52Updated this week
• phil-barrett / PicoCNC
  Raspberry Pi Pico based grblHAL Controller
  ☆147Updated last year
• spoter368 / os3m-software
  PC-side software for interpreting and configuring the OS3M mouse
  ☆90Updated last year
• amymakesstuff / flexure-fun
  flexure related mechanisms
  ☆118Updated 5 years ago