Alternatives and similar repositories for WacomRipoff:

Users that are interested in WacomRipoff are comparing it to the libraries listed below

• jockm / lichee-nano-one-key-package
  lichee-nano-one-key-package
  ☆12Updated 3 years ago
• CRImier / AltmodeFriend
  Altmode Friend code, STEP and other files
  ☆30Updated 7 months ago
• TEC-IST / rp2040-hdmi-1080p-hardware
  ☆35Updated last year
• Kurokesu / SCE2-GRBL
  Kurokesu motion controller SCE2-M module GRBL based firmware
  ☆17Updated 3 months ago
• fdufnews / SMART-Response-XE-Low_level
  Low level software for the SMART response XE
  ☆26Updated 3 years ago
• DynamicPerception / ArduinoAT90USB
  AT90USB64x/128x Support for Arduino IDE
  ☆19Updated 8 years ago
• aidanchandra / serial-plotter
  ☆16Updated last year
• EvanKrall / pipad
  A PCB for putting a Raspberry Pi CM4 inside a 1st-generation iPad.
  ☆58Updated last year
• exentio / koyomi-lvds-hat
  Raspberry Pi hat to test Vaio P displays
  ☆20Updated 3 months ago
• rbtsco / StickHub
  The Space Friendly 7-Port USB 2 Hub - KiCAD design files
  ☆30Updated 3 years ago
• edgepro-dev / edgepro-sch
  EdgePro Schematics
  ☆9Updated 2 years ago
• sitronlabs / Solder-Ninja-Pen-Hardware
  Enclosure and Circuit Board for the Solder Ninja Pen
  ☆34Updated last year
• ginbot86 / DingoCharge-Shizuku
  USB PD/PPS direct battery charge controller script for the YK-Lab Shizuku USB tester (a.k.a. YK-Lab YK001, AVHzY CT-3, Power-Z KT002, ATO…
  ☆75Updated last year
• charlie-x / eakins-camera
  controlling the eakins microscope camera via sockets
  ☆54Updated last year
• CRImier / NGFF
  M.2 NGFF接口标准
  ☆23Updated 2 years ago
• notro / gud-pico
  Raspberry Pi Pico GUD USB Display
  ☆30Updated 5 months ago
• wattnotions / PrettySmallRobot
  ☆23Updated last year
• CRImier / HaD_talking_pd
  "Talking PD" article code repository
  ☆13Updated last year
• SyedTahmidMahbub / q-dpico_picprog72
  Quick and dirty PIC16F72 programmer using the Raspberry Pi Pico and MicroPython
  ☆32Updated last year
• aziddy / nightvison_goggles
  Nightvision Goggles/Hat made from a some random composite camera, 3D printed enclosure, 2" tft screen, IR Torch, boost converter and a US…
  ☆19Updated 3 years ago
• Emeryth / sma-q2-oss
  Open source firmware for the SMA-Q2 smart watch
  ☆68Updated 4 years ago
• kasbah / push-on-hold-off
  Simple power switch using a push button. Push to turn on, hold to turn off.
  ☆16Updated 6 months ago
• antmicro / m2-pcie-adapter
  Adapter card exposing M.2 (key-M) signals on PCIe x4 card edge socket.
  ☆39Updated 10 months ago
• arturo182 / keyboard_featherwing_hw
  ☆36Updated 4 years ago
• RasmusB / USB-Keyboard-Adapter
  An Psion to USB keyboard controller
  ☆44Updated 2 years ago
• dosdude1 / zif-ide-ssd
  A custom-designed IDE SSD for use in any machine that utilizies a 1.8" ZIF IDE hard disk.
  ☆90Updated 2 years ago
• RoboticsBrno / RB3200-ESP32universal
  The ESP32 board you have always dreamed about!
  ☆12Updated 3 years ago
• devbisme / WireIt
  KiCad PCBNEW plugin that lets you add wires between pads on a PCB, delete them, and swap wires between pads.
  ☆85Updated 2 months ago
• dengyutu / CU-Project-Drawing-Robot
  ☆18Updated last year
• diimdeep / DS201_PRO
  firmware for DS201 PRO oscilloscope from minidso.com
  ☆14Updated 8 years ago