Pinoccio / tool-serial-pcap
Script to capture packets from serial and convert them to pcap format
☆38Updated 4 years ago
Alternatives and similar repositories for tool-serial-pcap:
Users that are interested in tool-serial-pcap are comparing it to the libraries listed below
- BeagleBone Cape EEPROM Generator☆25Updated last year
- Connect to Black Magic Probe TRACESWO endpoint☆25Updated 6 years ago
- Serial port PCAP capture tool not just for Modbus-RTU☆58Updated 3 years ago
- InfraRed Analyzer plugin for Saleae Logic software☆26Updated 10 years ago
- Hardware of Jasper's Electronic Load R2☆21Updated 6 years ago
- PL2303HX Userspace GPIO control tool☆35Updated 4 years ago
- Experimental kernel modules towards an in-kernel LoRaWAN socket driver☆36Updated 5 years ago
- gs_usb compatible firmware for candleLight, cantact and canable☆24Updated 6 years ago
- ☆17Updated 9 years ago
- basic command line utility to automate the Saleae Logic software using the ppannuto python-saleae library☆40Updated 3 years ago
- (I have long since not worked on this and I'm not actively working on it -- the design files here are for reference as it got some popula…☆1Updated 10 years ago
- A Linux command-line alternative to the FTDI FTProg utility for FTDI's FT-X series☆128Updated 9 months ago
- Master code for slave devices☆18Updated 5 years ago
- IEEE802.15.4 over USB Linux kernel driver☆16Updated last year
- USB DFU bootloader for the stm32 based autopilots☆28Updated 2 years ago
- Work with micro-controller special function register in gdb.☆17Updated 7 years ago
- create sanity in the insanity☆31Updated 3 years ago
- Setup and install for ARMinARM board.☆29Updated 9 years ago
- Open Source libs to access the saleae logic analyzer hardware http://www.saleae.com/logic/☆41Updated 7 years ago
- ☆17Updated 8 years ago
- An inexpensive Open Source blackmagic probe compatible SWD debugger designed to be used with ARM GDB.☆35Updated 5 years ago
- This code allows using the ChibiOS HAL with FreeRTOS.☆17Updated 2 years ago
- Pin utilities for BeagleBone Black☆38Updated 2 years ago
- Full-featured command-line shell interface☆28Updated 4 years ago
- CDC-ECM (Linux and macOS USB network) example SAMD21 embedded web server (lwip 2.1.2 based)☆25Updated 4 years ago
- ☆28Updated 9 years ago
- Fork of OpenOCD with NuttX thread support.☆24Updated 6 years ago
- MuxPi is an open hardware and open software board which was designed to aid in automating tasks on physical devices. Initial goal was to …☆17Updated 3 years ago
- lpc21isp - Portable command line ISP for Philips LPC family and Analog Devices ADUC70xx☆69Updated last year
- Fully isolated, input debounce Hat for Raspberry Pi, for up to 6 switches, relays and powered devices☆23Updated 5 years ago