NebraLtd / LoRa-mPCIeLinks
Open source mPCIe LoRa® concentrators from Nebra
☆20Updated 3 years ago
Alternatives and similar repositories for LoRa-mPCIe
Users that are interested in LoRa-mPCIe are comparing it to the libraries listed below
Sorting:
- A simple SX1303 based LoRa Gateway for FeatherWing ecosystem.☆25Updated 4 years ago
- Semtech's LoRa RF drivers for mbed OS☆34Updated 5 years ago
- Demonstration application for LoRa Edge tracker reference design - compatible with LoRa Basics Modem-E☆19Updated 3 weeks ago
- HW and FW of a TinyGS 2.4 GHz LoRa ground station https://tinygs.com/☆28Updated 6 months ago
- STM32WL SOC LoRa / LoRaWAN development board with JTAG debugger and sensors for light, temperature, humidity, pressure, 3-axis digital ma…☆15Updated last month
- Driver for LR11xx chip (LR1110 / LR1120 / LR1121)☆34Updated last month
- LR11xx chip (LR1110 / LR1120 / LR1121) and SX126x chip (SX1261 / SX1262 / SX1268) SDK☆57Updated last month
- Open source files for RAK2270 Sticker Tracker☆28Updated 5 months ago
- HydraUSB3 (WCH CH569) open source test firmware / examples / libraries to experiment with streaming / high-speed protocols (USB2 HS, USB3…☆84Updated 2 years ago
- using stm32f4-discovery with SX1262 for voice☆34Updated last year
- USB-C 1-60V Current and Voltage Controlled Power Supply☆18Updated 4 years ago
- Arduino library to support LoRaWAN communication using the STM32WL series.☆50Updated 3 months ago
- RUI3 BSP for RAK3172 modules☆29Updated 3 weeks ago
- CH340, CH343, CH342, CH344,CH348☆36Updated 2 years ago
- STM32WL55 Lora Ping pong example☆15Updated 3 years ago
- WIP, does NOT work yet. See https://github.com/novag/LoRa-ATtiny-Node for a working version made for the ATtiny85.☆12Updated 4 years ago
- Source code of the STM32 MCU which acts like a USB-SPI bridge on a sx1302/sx1303 USB Corecell gateway.☆21Updated 4 years ago
- USB-PD firmware for the stm32f072 - forked from https://git.clayhobbs.com/pd-buddy/pd-buddy-firmware☆31Updated 5 years ago
- Superseded by https://github.com/armmbed/mbed-os-example-lorawan-fuota☆18Updated 6 years ago
- Arduino port for Quectel BC66 LTE Narow Band modules ( OpenCPU based )☆51Updated 5 years ago
- A simple LoRa Mesh network low level layer for the Semtech SX126x transceivers.☆32Updated 2 years ago
- LoRa Basics™ Loader☆37Updated 5 years ago
- AX5043 Based USB Radio, dual band UHF and VHF☆32Updated 3 years ago
- STM32H7 Arduino form factor and software compatible board☆34Updated 4 years ago
- AcSIP S7XG LoRaWAN/GPS module library☆26Updated 6 years ago
- CMSIS-DAP compliant SWD Programmer☆26Updated last year
- An attempt to make my own GTI with acceptable output harmonics☆22Updated 5 years ago
- GitHub Repository for iotSDR open source material☆39Updated last year
- Reference implementation of a Hardware Abstraction Layer and a Packet Forwarder for a LoRaWAN One Channel Hub. This is an ESP-IDF project…☆45Updated 8 months ago
- Linux on 400MHz ARM926 AT91SAM9N12☆33Updated 3 years ago