Digilent / Basys-3-GPIO

Related projects ⓘ

Alternatives and complementary repositories for Basys-3-GPIO

• sipeed / TangMega-138KPro-example
  Tang Mega 138K Pro examples
  ☆57Updated this week
• quartiq / bscan_spi_bitstreams
  FPGA gateware and pre-build bitstreams that expose SPI over JTAG. The protocol is implemented (among others) by openocd.
  ☆52Updated last year
• ATaylorCEngFIET / CrowdSupplyWorkShop1
  ☆13Updated 3 years ago
• hdl-util / mipi-ccs
  Control a MIPI Camera over I2C
  ☆21Updated 4 years ago
• sam210723 / fpga
  Collection of projects for various FPGA development boards
  ☆42Updated 6 months ago
• Parretto / DisplayPort
  DisplayPort IP-core
  ☆50Updated 3 weeks ago
• nand2mario / ddr3-tang-primer-20k
  DDR3 controller for Tang Primer 20K (Gowin GW2A-18C fpga). DDR3-800 speed and low latency.
  ☆48Updated last year
• BrianHGinc / BrianHG-DDR3-Controller
  DDR3 Controller v1.65, 16 read/write ports, configurable widths, priority, auto-burst size & cache on each port. VGA/HDMI multiwindow vi…
  ☆70Updated 7 months ago
• AngeloJacobo / FPGA_SDRAM_Controller
  SDRAM controller optimized to a memory bandwidth of 316MB/s
  ☆25Updated 3 years ago
• sipeed / TangPrimer-25K-example
  TangPrimer-25K-example project
  ☆31Updated last month
• kholia / xvc-esp32
  Wireless JTAG 'cable' for Xilinx FPGAs. This is an 'English fork' of https://github.com/ciniml/xvc-esp32 project.
  ☆79Updated 3 years ago
• ultraembedded / fpga_test_soc
  A small test SoC for various soft-CPUs (Cortex-M0, RISC-V)
  ☆29Updated 4 years ago
• kholia / xvcpi
  Use Raspberry Pi as a wireless Xilinx JTAG 'cable'. Note: This is a portable, tested, maintained clone of https://github.com/strongleg/xv…
  ☆29Updated 3 years ago
• gtaylormb / ultra96v2_imx219_to_displayport
  Raspberry Pi v2 camera (IMX219) to DisplayPort of Ultra96-V2 board through PL
  ☆67Updated 2 years ago
• XyleMora / EBAZ4205
  EBAZ4205 is Xilinx Zynq based mining board used in Ebang Ebit E9+ bitcoin miner machine.
  ☆62Updated 8 months ago
• smartperson / spartan-edge-accelerator-graphical-system
  WIP Graphics layer and inter IC communication for the Spartan Edge Accelerator fpga/mcu hybrid board
  ☆20Updated 2 years ago
• projf / fpgatools
  Tools for FPGA development.
  ☆44Updated last year
• viktor-nikolov / MicroBlaze-DDR3-tutorial
  Tutorial of a HW design of MicroBlaze using DDR3 RAM on Arty A7 board; DDR3 RAM speed test application
  ☆30Updated 5 months ago
• vfinotti / cortex-m0-soft-microcontroller
  Soft-microcontroller implementation of an ARM Cortex-M0
  ☆23Updated 5 years ago
• hdl-util / mipi-demo
  MIPI CSI-2 + MIPI CCS Demo
  ☆67Updated 3 years ago
• hdl-util / sdram-controller
  Generic FPGA SDRAM controller, originally made for AS4C4M16SA
  ☆79Updated 4 years ago
• AvaotaSBC / AvaotaHyperCard
  AvaotaHyperCard is a TF card multiplexer enabling seamless switching between native TF card and USB disk modes via a button.
  ☆18Updated 4 months ago
• Pillar1989 / Demo_project
  ☆20Updated 3 years ago
• stffrdhrn / uart
  Verilog uart receiver and transmitter modules for De0 Nano
  ☆18Updated 10 years ago
• jakubcabal / uart-for-fpga
  Simple UART controller for FPGA written in VHDL
  ☆91Updated 3 years ago
• sipeed / TangMega-138K-example
  TangMega-138K-example project
  ☆30Updated 2 weeks ago
• briansune / Delta-Sigma-DAC-Verilog
  Delta Sigma DAC FPGA
  ☆29Updated 10 months ago
• fpgacademy / DESim
  ☆40Updated last year
• rstar900 / Dual-Core-RISC-V-Processor
  A dual core RISC-V processor (using PULP platform SoC) implemented on a Digilent Arty S7-50 FPGA board.
  ☆12Updated 2 years ago
• ZiyangYE / General-Slow-DDR3-Interface
  A general slow DDR3 interface. Very little resource consumption. Suits for all FPGAs with 1.5V IO voltage.
  ☆36Updated 6 months ago