Alternatives and similar repositories for AE1-CNC-engraver-router

Users that are interested in AE1-CNC-engraver-router are comparing it to the libraries listed below

• uStepper / uStepper-RobotArm-Rev3
  uStepper Robot Arm STL files and instruction Revision 3
  ☆94Updated 7 years ago
• neuroprod / ClosedLoopDriver
  Arduino controler for a closed-loop stepper motor
  ☆87Updated 10 years ago
• buildbotics / bbctrl-pcb
  Buildbotics CNC, 3D printer and other machine controller
  ☆49Updated 3 years ago
• uStepper / uStepper
  Repository for uStepper
  ☆100Updated 6 years ago
• gnea / grbl-LPC
  ☆76Updated 3 years ago
• T-Kuhn / ESP32-MicroRobotArm
  Micro Robot Arm with ESP32 and 28BY-48 12V steppers
  ☆82Updated 6 years ago
• BCN3D / BCN3DSigma-Mechanics
  All the mechanics of the BCN3D Sigma 3D Printer.
  ☆105Updated 7 years ago
• uStepper / uStepperS
  ☆53Updated 2 years ago
• zelogik / AluXY
  A ful metal CoreXY system for 3D printer, mill etc..
  ☆47Updated 11 years ago
• bdring / Grbl_ESP32_Development_Controller
  A CNC controller to use and test Grbl_ESP32
  ☆79Updated 5 years ago
• cncgoko / Goko
  A desktop application for CNC milling controller running TinyG or Grbl
  ☆73Updated 6 years ago
• fra589 / cn5X
  cn5X++ is a new 5/6 axis Grbl control panel to implement all the grbl-Mega-5X capabilities.
  ☆81Updated last year
• BCN3D / BCN3DSigma-Electronics
  6 Axis Open Source Electronics for BCN3D Sigma 3D Printer.
  ☆55Updated 4 years ago
• ottoragam / Brushed-DC-Servo-Drive
  Low cost servo drive for small CNC machinery
  ☆54Updated 9 years ago
• bdring / Grbl_ESP32_TMC2130_Plotter_Controller
  ☆67Updated 5 years ago
• SourceRabbit / gcode-sender
  Cross platform 3-Axis CNC Machines control software
  ☆82Updated last year
• avtehnik / gt2-gear-genaretor
  ☆37Updated 2 years ago
• danithebest91 / ServoStrap
  servo-controlled reprap 3D printer
  ☆98Updated 10 years ago
• ryannining / karyacontroller
  4 axis CNC, 3D, Laser Controller
  ☆63Updated last year
• MarginallyClever / sixi-2
  Sixi 2 Robot Arm
  ☆34Updated 3 years ago
• misan / dcservo
  Position control of DC motors
  ☆329Updated 11 months ago
• JoLamMaker / ThisArm_Firmware
  G-code enabled firmware for Robot Arms
  ☆33Updated 3 years ago
• ChrisWag91 / PI-LCNC
  Adapter board to use a Raspberry Pi as a Linux CNC controller
  ☆59Updated 3 years ago
• bdring / Grbl_ESP32_MPCNC_Controller
  A Grbl_ESP32CNC Controller for MPCNC
  ☆90Updated 3 years ago
• gvJaime / Sunrise
  3D Printable DLP 3D printer
  ☆47Updated 7 years ago
• adgaudio / dlp_printer
  Complete designs for a completely custom built Laser-SLA 3D printer. My own Mechanical Designs, Firmware, and Software.
  ☆31Updated 10 years ago
• MarginallyClever / Makelangelo-firmware
  CNC firmware for many different control boards and kinematic systems. Originally the brain of the Makelangelo art robot.
  ☆164Updated 4 years ago
• Aus3D / RUMBA32
  A powerful 32-bit 3D printer control board.
  ☆74Updated 5 years ago
• bfoz / Ester
  Ester 3D Laser Printer
  ☆40Updated last year
• MarginallyClever / GcodeCNCDemo
  a simple example of making a CNC machine from an Adafruit Motor Shield
  ☆217Updated 2 years ago