Alternatives and similar repositories for Denali:

Users that are interested in Denali are comparing it to the libraries listed below

• Annex-Engineering / Sherpa-Extruder
  A 6:1 Bowden and Direct Drive Extruder Platform
  ☆26Updated 4 years ago
• VzBoT3D / Vz-HextrudORT
  Extruder based on MirageC HextrudORT
  ☆111Updated 4 months ago
• HelgeKeck / vcore-idex
  v-core idex config
  ☆3Updated last year
• MASP-Solutions / MLM-IDEX
  MLM IDEX is a mod for BLV MGN CUBE Project
  ☆27Updated 3 years ago
• VoronDesign / Jetpack-Extruder
  Extruder for the Voron Printers
  ☆30Updated 4 years ago
• bigtreetech / MMB
  ☆70Updated 3 weeks ago
• GadgetAngel / Cricut_Voron_Logos
  This repository is to contain vector files I have created for the Voron community and for my own Voron builds
  ☆46Updated 3 years ago
• HaythamB / TAMV
  TAMV = Tool Align Machine Vision for Duet based tool changing 3D printers.
  ☆52Updated last year
• pure100kim / ERCF_Filament_Cutting_MOD
  ERCF Filament Cutting Mod
  ☆82Updated last year
• kevinakasam / Papilio-Belt-Extruder
  The Papilio is an extruder that uses GT2 Timing Belts instead of metal gears to push the filament.
  ☆97Updated 3 months ago
• RobertLorincz / Orbiter-Toolboards
  ☆49Updated last week
• 3DPrintingMods / VoronTrident-Sidepack
  ☆110Updated last year
• christophmuellerorg / voron_0_pancake_board
  ☆45Updated 3 years ago
• AdamV3D / V3D-Voron-Mods
  Modifications for Voron Printers by Vector 3D
  ☆59Updated 3 months ago
• VzBoT3D / VzBoT-UserMods
  Community modifications for the VzBot 3D-printer
  ☆116Updated 3 months ago
• Mellow-3D / Klipper-CAN-Toolboards
  ☆49Updated last year
• nhchiu / Steppy-Torque-Wrench
  A 3D printed torque wrench design inspired by the LDO mascot - Steppy
  ☆19Updated 3 years ago
• 3DPrintingMods / VoronTrident-AluminumG
  Aluminum Gantry (6mm and 9mm belts) for Voron Trident
  ☆104Updated 7 months ago
• JiMcNulty / FDC
  non-linear frame deformation calibration and compensation 2.0
  ☆78Updated last year
• Annex-Engineering / Sherpa_Heavy-Extruder
  Sherpa Mini's fat cousin, built to push filament to flowrates of 100mm^3/s
  ☆35Updated last year
• dmbutyugin / klipper
  Klipper is a 3d-printer firmware
  ☆75Updated this week
• FYSETC / FYSETC-ERB
  This is dedicated controller board for VORON ERCF (EnragedRabbitProject)
  ☆50Updated 8 months ago
• PrintersForAnts / Voron-Construct
  "This is the Construct. It's our loading program. We can load anything... From clothing to equipment, weapons, training simulations; anyt…
  ☆88Updated 2 months ago
• VzBoT3D / Goliath
  The Goliath Hotend
  ☆96Updated 4 months ago
• ArmoredTurtle / TurtleNeck
  Simple toolhead buffer for AFC systems
  ☆53Updated 3 months ago
• Annex-Engineering / Redoubt
  Papejellys Pet Project - Moving Gantry - Fixed Bed - CoreXY
  ☆60Updated last year
• henrikssn / TurboCAN
  This is the official repository for the TurboCAN controller board, designed specifically for the Voron AfterBurner toolhead but can also …
  ☆78Updated 3 years ago
• Cartographer3D / cartographer-probe
  ☆51Updated last month
• pbsuper / VZTrident
  400x400 VZbot with Trident Z
  ☆68Updated last year
• Mamsih / Galileo-stealthBurner
  Galileo extruder for stealthBurner
  ☆43Updated 2 years ago