Alternatives and similar repositories for hardware:

Users that are interested in hardware are comparing it to the libraries listed below

• atc1441 / TI_CC_Ghidra_CPU
  Ghidra Plugin for Texas Instrument CC 8051 SOC's especially CC1110 and CC2510
  ☆11Updated 3 years ago
• devttys0 / rtlsdr-tcxo
  ☆10Updated 9 years ago
• giech / sdr_433
  RTL-SDR 433MHz signal recovery with MATLAB
  ☆9Updated 10 years ago
• saleae / JtagAnalyzer
  Outdated. See https://github.com/saleae/jtag-analyzer for the official Saleae JTAG Analyzer
  ☆12Updated 6 years ago
• bvernoux / micropython
  The Micro Python project (adding HydraBus Port)
  ☆8Updated 3 years ago
• ivanovp / blue_flash
  SPI NOR flash programmer using Blue Pill (STM32 development board)
  ☆18Updated 6 years ago
• newaetech / CANoodler
  CANoolder: CAN to 3.3V logic level interface. Dumb. Cheap. Simple. Pick 3.
  ☆13Updated 7 years ago
• chipfail / pmod-mux
  Hardware design files for the PMOD based MUX
  ☆13Updated 5 years ago
• JohnDMcMaster / faxitron
  Faxitron DX-50 x-ray utilities
  ☆23Updated last year
• RamiroPareja / FaultInjectionTutorial
  This is the code for the fault injection tutorial I wrote. Read the README for more information.
  ☆13Updated 11 years ago
• hydrausb3 / wch-ch56x-bsp
  WCH CH56x BSP for HydraUSB3 v1 hardware
  ☆17Updated last year
• azonenberg / kicad-libraries
  My KiCAD libraries
  ☆15Updated last week
• greatscottgadgets / gsg-kicad-lib
  GSG's schematic symbols and modules for KiCad
  ☆52Updated last year
• adafruit / Custom-Magstripe-Swiper
  Merges a microcontroller (Teensy w/Arduino) with a magstripe swiper
  ☆22Updated 5 years ago
• cpldcpu / Gluon
  A size optimized bootloader and software library for the AVR ATtiny
  ☆17Updated 8 years ago
• jevinskie / bus-pirate
  Bus Pirate
  ☆13Updated 4 years ago
• stacksmashing / pdnd-example
  An example showing how to develop basic firmware for the Pico Debug'n'Dump
  ☆15Updated last year
• RoganDawes / nexmon_wifi_covert_channel
  ☆12Updated 2 years ago
• sigrokproject / sigrok-dumps
  Read-only mirror of the official repo at git://sigrok.org/sigrok-dumps. Pull requests welcome. Please file bugreports at sigrok.org/bugzi…
  ☆18Updated 5 months ago
• Jeija / renard-phy
  Open Sigfox Stack Reference Implementation - Physical Layer for SDR
  ☆22Updated 4 years ago
• vfonov / opendous-jtag
  USB-JTAG interface transferred from code.google.com/p/opendous-jtag
  ☆13Updated 9 years ago
• themadinventor / uclinux-stm32
  uClinux for Cortex-M3 and Cortex-M4
  ☆14Updated 11 years ago
• DangerousPrototypes / dangerous-prototypes-open-hardware
  Automatically exported from code.google.com/p/dangerous-prototypes-open-hardware
  ☆79Updated last year
• dirkx / saleae-logic-ISO7816-smartcard-Analyser
  Analyser for the ISO7816 smart cards and SIM card protocol to be used with the Logic Analyser of Saleae.
  ☆37Updated 9 years ago
• tomverbeure / cisco-hwic-3g-cdma
  Reverse Engineering of the Cisco HWIC-3G-CDMA PCB
  ☆40Updated last year
• greatscottgadgets / pyfwup
  Python FirmWare UPgrader -- a DFU (and similar) utility for python
  ☆22Updated 7 months ago
• tedyapo / image2eagle
  Eagle image importer
  ☆22Updated 4 years ago
• glabmoris / rfcat-hcs
  RFCat scripts to dump HCS keeloq encoder data
  ☆13Updated 8 years ago
• upsidedownlabs / Candy-UART
  Candy size USB to UART bridge.
  ☆17Updated 4 years ago
• xtrx-sdr / xc3sprog
  xc3sprog is a suite of utilities for programming Xilinx FPGAs, CPLDs, and EEPROMs with the Xilinx Parallel Cable and other JTAG adapters …
  ☆17Updated 5 years ago