greatscottgadgets / pyfwup
Python FirmWare UPgrader -- a DFU (and similar) utility for python
☆22Updated 9 months ago
Alternatives and similar repositories for pyfwup:
Users that are interested in pyfwup are comparing it to the libraries listed below
- DFU bootloader for SAMD11 and SAMD21 microcontrollers☆21Updated 10 months ago
- a 2.4 GHz SDR neighbor using 1 bit ADC☆30Updated 3 years ago
- SPI NOR flash programmer using Blue Pill (STM32 development board)☆19Updated 7 years ago
- LimeSDR Mini v2 gateware project☆23Updated 5 months ago
- GitHub Repository for iotSDR open source material☆34Updated last year
- Just messing with an FPGA☆25Updated 5 years ago
- Couple of scripts which checks length matching of your KiCad design.☆26Updated 8 years ago
- an experimental SDR platform☆43Updated 2 years ago
- Amaranth HDL libary for building USB-capable SoC designs.☆22Updated last month
- high-speed USB analyzer neighbor☆16Updated last year
- Verilog for the Bus Pirate Ultra FPGA☆26Updated 5 years ago
- ChipJabber-Unplugged does new-school attacks with old-school logic.☆12Updated 4 years ago
- JTAG Hardware Abstraction Library☆36Updated last year
- WCH CH56x BSP for HydraUSB3 v1 hardware☆17Updated last year
- KiCad bus length matching script.☆30Updated 10 months ago
- Typed pure Python library to parse HID report descriptors☆43Updated last year
- HUB repository for all the Catsniffer Firmware code available maintaned by Electronic Cats☆21Updated last week
- GSG's schematic symbols and modules for KiCad☆51Updated last year
- Saleae Serial Peripheral Interface (SPI) Analyzer☆20Updated last year
- ice40 USB Analyzer☆58Updated 4 years ago
- python library providing utilities, data structures, constants, parsers, and tools for working with USB data☆57Updated 2 months ago
- A ported version of the libairspy library to use with Android 3.1+☆17Updated 9 years ago
- FPGA glitcher based on toothlessco's arty-glitcher, but for the icebreaker☆17Updated 5 years ago
- SDR prototype with 90 MHz bandwidth, built as a demonstrator for hsdaoh☆14Updated 11 months ago
- microcontroller-based FPGA / JTAG programmer☆74Updated 4 months ago
- ☆51Updated 2 years ago
- SPI flash MITM and emulation (QSPI is a WIP)☆20Updated 3 years ago
- CANoolder: CAN to 3.3V logic level interface. Dumb. Cheap. Simple. Pick 3.☆13Updated 7 years ago
- xc3sprog is a suite of utilities for programming Xilinx FPGAs, CPLDs, and EEPROMs with the Xilinx Parallel Cable and other JTAG adapters …☆18Updated 5 years ago
- Utilizing fl2k (FL2000-based USB3-SVGA video adapter) as a bench signal generator with TUI☆27Updated 2 years ago