Alternatives and similar repositories for CAN3:

Users that are interested in CAN3 are comparing it to the libraries listed below

• openvehicles / CAN-RE-Tool
  A reverse engineering tool for systems based on CAN bus communications
  ☆81Updated 4 years ago
• hanswolff / TeslaCanBusInspector
  Tesla Model S/3/X CAN Bus Inspector (.NET Core 3.0)
  ☆13Updated 2 years ago
• finderman2 / CANtools
  A set of python scripts for use with the CANtact CAN bus logger
  ☆16Updated 8 years ago
• damienmaguire / Tesla-Gen3-Charger
  Reverse Engineering of the Tesla Gen3 charger and development of an open source control board
  ☆14Updated 3 years ago
• damienmaguire / Tesla-Model-3-Charger
  Reverse Engineering of the Tesla Model 3 charger and development of an open source control board
  ☆30Updated 6 months ago
• craigpeacock / Tesla-ChargePort-Decoder
  Tesla ChargePort SWCAN Decoder
  ☆12Updated 4 years ago
• linklayer / reversegear
  Offline Reverse Engineering Tools for Automotive Networks
  ☆50Updated last year
• openxc / openlpc-USB_Bootloader
  LPC1759 USB bootloader based on a Mass Storage Device
  ☆12Updated 8 years ago
• hotelzululima / DJI_ftpd_aes_unscramble
  DJI has modified the GPL Busybox ftpd on Mavic, Spark, & Inspire 2 to include AES scrambling of downloaded files...
  ☆17Updated 7 years ago
• damienmaguire / Tesla-Model-3-Charge-Port-Controller
  Opensource hardware stand alone controller for the Tesla Model 3 Charge Port ECU
  ☆21Updated 3 years ago
• ohjeongwook / CanBusHacker
  ☆29Updated 4 years ago
• afterhoursengineering / _CANcrusher_ARM
  Open Source CANbus hacking project.
  ☆13Updated 4 years ago
• frk2 / toyoyta_radar_control_can
  Reverse engineered can bus messages to enable the automotive Radar found on 2016+ Toyotas with TSS (corolla, Rav4, Highlander, camry)
  ☆34Updated 6 years ago
• RasmusB / CANPi
  A CAN controlled add-on board for Raspberry Pi
  ☆22Updated 11 years ago
• autosportlabs / OBD2CAN
  Provides a bridge between any OBD2 compliant vehicle and the CAN bus interface.
  ☆44Updated 5 years ago
• ebroecker / SocketCandecodeSignals
  filter to decode signals in combination with candump (socketcan tools)
  ☆21Updated 5 years ago
• linux-can / can-doc
  Linux-CAN / SocketCAN documentation
  ☆20Updated last year
• glabmoris / rfcat-hcs
  RFCat scripts to dump HCS keeloq encoder data
  ☆13Updated 8 years ago
• projectgus / car_hacking
  Miscellanous code for interacting with car electronics
  ☆48Updated 2 months ago
• linux-can / can-firmware
  Firmware for supported CAN adapters
  ☆12Updated 10 years ago
• Gutenshit / CANBadger-Server
  The CanBadgers best friend! Control multiple CanBadgers over Ethernet.
  ☆19Updated 4 years ago
• osmocom / osmo-ccid-firmware
  Osmocom CCID reader firmware; mirror of https://gitea.osmocom.org/sim-card/osmo-ccid-firmware
  ☆18Updated 3 weeks ago
• karlyamashita / common_libraries
  These are reusable libraries. You'll need to include the LSP.h file and remove comment for what you need.
  ☆27Updated 3 weeks ago
• collin80 / M2RET
  GVRET fork to Macchina M2 board
  ☆74Updated 4 years ago
• linklayer / cantact-book
  Documentation for the CANtact devices
  ☆31Updated 3 years ago
• Gutenshit / CANBadger
  CANBadger - Hardware & Firmware Repository - An open-source automotive security research platform.
  ☆62Updated 4 years ago
• carloop / hardware
  OBD-II CAN adapter for Particle Electron, Photon, and RedBear Duo
  ☆106Updated 5 years ago
• zombieCraig / SigExplorer
  CAN Bus Signal Explorer
  ☆11Updated 10 years ago
• plaes / i-miev-obd2
  Mitsubishi I-Miev OBD-II PID documentation
  ☆29Updated 11 years ago
• majbthrd / CANsniffer
  CANbus sniffer using STM32F042 microcontroller
  ☆31Updated 7 years ago