Alternatives and similar repositories for OctoPrint-EmailNotifier

Users that are interested in OctoPrint-EmailNotifier are comparing it to the libraries listed below

• MoonshineSG / Octoprint-Filament
  Pause print on GPIO sensor
  ☆25Updated 7 years ago
• bertmelis / SDS011
  Non blocking SDS011 sensor library for ESP8266
  ☆16Updated last year
• hallard / WeMos-RFM69
  WeMos RFM69 RF Gateway + IC2 Oled + ATSHA204
  ☆24Updated 7 years ago
• todbot / NeoJoints
  Neopixel Joints, millable on the Othermill
  ☆27Updated 8 years ago
• reischle / fritzmeter
  arduino project for a speedometer / dashboard like display of fritzbox WAN RX/TX load using servos
  ☆11Updated 12 years ago
• msraynsford / APConfig
  Creates an access point and allows the user to change the name and password remotely
  ☆39Updated 6 years ago
• kontakt / Octoprint-Filament-Reloaded
  ☆44Updated 2 years ago
• ardyesp / WeatherDisplay
  Get and display Open Weather Network weather
  ☆32Updated 9 years ago
• pilight / pilight_firmware
  Prefilter for 433 MHz remotes (and similar protocolls) written for an attiny45
  ☆19Updated 10 years ago
• probonopd / arduino-infrared-pronto
  Infrared remote control player using Arduino platform
  ☆26Updated 10 years ago
• flyandi / BitsyLED
  A simple LED driver for Remote Control Cars, Planes, Multicopters and everything in between
  ☆33Updated 2 years ago
• EspLight / EspLight-firmware
  firmware for on a EspLight Board.
  ☆9Updated 9 years ago
• p2baron / x10rf
  Energia Library for sending x10 messages by RF
  ☆14Updated 8 years ago
• DIYElectronicsZA / Anycubic_i3_Mega
  Firmware and Resources for the Anycubic i3 Mega
  ☆25Updated 7 years ago
• joushx / Arduino-RGB-Tools
  A arduino library with tools for controlling an RGB-LED
  ☆40Updated 8 years ago
• MoonshineSG / Simplify3D-to-OctoPrint
  Upload GCODE generated by Simplify3D to OctoPrint
  ☆34Updated 7 years ago
• henryk / milight-reverse-engineering
  Tools that were used in the reverse engineering of the Mi-Light 2.4GHz LED light control protocol
  ☆42Updated 10 years ago
• mischkasmith / lctech-2ch-relay
  ☆10Updated 7 years ago
• matt448 / OctoPiTouchPanel
  Touchscreen interface for OctoPrint using the kivy gui framework
  ☆15Updated 5 years ago
• SuperHouse / D1MPOWER
  Power supply shield for the WeMos D1 Mini with ESP8266
  ☆17Updated 7 years ago
• mike-rankin / ESP8266_RGB_Matrix_Cable_Free_Version
  Version of the ESP8266 RGB Matrix that is one single board for the 64x32 display.
  ☆38Updated 5 years ago
• TilBlechschmidt / FINDTracker
  Client implementation for schollz/find on a ESP* platform.
  ☆14Updated 8 years ago
• duisenberg / AnyCubic-I3
  Some Files and Infos for the AnyCubic Prusa I3 3D-Printer
  ☆18Updated 7 years ago
• letscontrolit / ESPEasyMySensors
  Easy MultiSensor device based on ESP8266 using MySensors library
  ☆22Updated 9 years ago
• SensorsIot / Weight-Sensors
  ☆46Updated 7 years ago
• SensorsIot / MAX7219-4-digit-display-for-ESP8266
  MAX7219 library for 4 digit display ported to the ESP8266
  ☆18Updated 7 years ago
• SensorsIot / IFTTT-Dash-Button
  Sketch for an IFTTT Dash Button with an ESP-01
  ☆39Updated 8 years ago
• GerLech / ATSmartHome
  Using ArduiTouch hardware as a smart home control center. This is currently a work in progress, but uploaded files are always tested and …
  ☆20Updated 5 years ago
• leifclaesson / LeifHomieLib
  Light weight homie v3 (MQTT) Library for ESP8266 and ESP32
  ☆19Updated last week
• Coding-Badly / TinyISP
  ArduinoISP replacement with: Tiny Debug Knock Bang, Monitor, Tiny Tuner 2, and other amenities
  ☆19Updated 8 years ago