Alternatives and similar repositories for 3DPrinter-firmware

Users that are interested in 3DPrinter-firmware are comparing it to the libraries listed below

• MaxwellXyao / GRBL-0.8c-for-STM32
  GRBL0.8c移植于stm32,已调式通过
  ☆36Updated 8 years ago
• hyperstepper / NEMA17-HyperStepper
  Open source hardware - NEMA17 closed-loop stepper motor and driver
  ☆41Updated 5 years ago
• MaxwellXyao / GRBL-0.9j-for-STM32
  STM32F10x移植Grbl 0.9j
  ☆70Updated 8 years ago
• Meekdai / STM32-GRBL
  STM32 CNC Controller （GRBL v0_8）
  ☆105Updated 9 years ago
• lihulab / BLDC_controller
  无刷直流电机调速器
  ☆22Updated 11 years ago
• esden / open-bldc
  OpenSource Brushless Drive Controller - The official repository is at http://github.com/open-bldc/open-bldc
  ☆109Updated 12 years ago
• oshwcom / BLDC_STC15W401
  低成本（RMB 7元左右）12V的bldc驱动电路。基于STC15W401AS单片机。
  ☆27Updated 6 years ago
• KitSprout / IMUCube
  BLE, IMU and LED Development Kit，Use nRF51822 + MPU6500 + WS2812B
  ☆51Updated 8 years ago
• ads830e / grbl1.1f-stm32f103c8
  grbl1.1f for stm32f103c8
  ☆20Updated 5 years ago
• MaxwellXyao / SOLGUI_V2
  一个原创的12864OLED专用的迷你GUI。包括菜单页面，功能页面；可显示二值图片和图表，进行整数和小数参数调整，适合于飞思卡尔智能车比赛使用。
  ☆25Updated 8 years ago
• dukelec / cdstep
  Stepper Motor Controller
  ☆49Updated 2 weeks ago
• MakerLabMe / Marlin_STM32
  3d printer Marlin firmware for 32 bit arm cpu STM32F10X
  ☆75Updated 5 years ago
• dccharacter / STM32_Servo_Controller
  STM32-based servo/CNC/3D-printer controller
  ☆43Updated 12 years ago
• FreedomSnail / STM32F103_BOOT_USB_AES
  插上usb变成一个普通的移动u盘，将带升级的应用文件加密后丢进u盘，断电完成升级
  ☆17Updated 8 years ago
• KitSprout / QCopterRemoteControl
  遙控板 RemoteControl，使用 STM32F407VG / STM32F411CE
  ☆45Updated 8 years ago
• IRNAS / grbl_stm32
  grbl for stm32 with nucleo stepper drivers
  ☆36Updated 9 years ago
• yltzdhbc / SmartCanBus
  找不到得心应手的CAN调试工具吗？本项目是一个低成本（30rmb）、小体积、超迷你的开源CAN总线调试工具
  ☆63Updated 3 years ago
• KitSprout / QCopterMachineVision
  攝像板 MachineVision，使用 STM32F429ZG
  ☆32Updated 8 years ago
• hyperstepper / NEMA23-HyperStepper
  Open source hardware - NEMA23 closed-loop stepper motor and driver
  ☆26Updated 5 years ago
• limhyon / esc32
  ESC32
  ☆13Updated 12 years ago
• mycael / sensorlessBLDC
  Hardware and Software description for a sensorless BLDC Controller
  ☆18Updated 9 years ago
• open-bldc / open-bldc-hardware
  OpenSource Brushless Drive Controller Hardware
  ☆134Updated 12 years ago
• kmakise / F1C100S_DB_R1
  （黑猫）F1C100S开发板，相关镜像驱动会持续更新
  ☆18Updated 5 years ago
• x893 / CNC-STM32
  STM32 based CNC controller
  ☆105Updated 10 years ago
• KitSprout / MicroMultimeter
  MicroMultimeter，Use STM32F303CB
  ☆74Updated 8 years ago
• zhaojiahai / simpleBGC32
  ☆45Updated 7 years ago
• xjtuecho / UARTCAN
  A low-cost portable CAN(Controller Area Network ) adapter.
  ☆15Updated 2 months ago
• hotsauce1861 / STM32-PMSM
  Project of driving permanent magnet synchronous motor based on STM32F103XXX.
  ☆52Updated 5 years ago
• technosar / GRBL_STM32
  An open source, embedded, high performance g-code-parser and CNC milling controller written in optimized C that will run on a straight ST…
  ☆28Updated 4 years ago
• Kevincoooool / AltiumDesigner_PcbLibrary_3D
  3D package library collection
  ☆73Updated 6 years ago