Alternatives and similar repositories for Mirobot-STL

Users that are interested in Mirobot-STL are comparing it to the libraries listed below

• dsuarezv / GearSolver
  A cycloid gear graphical calculator to design cycloidal drives.
  ☆131Updated 4 years ago
• makerbase-mks / MKS-SERVO42C
  MKS SERVO42C, an upgraded version of MKS SERVO42B, built-in Field-Oriented control algorithm, position/speed/ torque closed-loop, 4 Half…
  ☆213Updated 3 years ago
• makerbase-mks / MKS-SERVO42B
  MKS SERVO42B is 3d printer closed loop stepper motor NEMA17 MKS SERVO42 developed by Makerbase that prevents losing steps. CPU is STM32F1…
  ☆181Updated 4 years ago
• uStepper / uStepper
  Repository for uStepper
  ☆100Updated 6 years ago
• ftobler / robotArm
  Software for a 3D Printed Robot Arm
  ☆141Updated 7 months ago
• uStepper / uStepper-RobotArm-Rev3
  uStepper Robot Arm STL files and instruction Revision 3
  ☆94Updated 8 years ago
• SourceRabbit / RabbitGRBL
  Professional grade, 100% GRBL compatible motion control firmware for the ESP32
  ☆71Updated this week
• uStepper / Robot-Arm-Rev-4
  STL files and instructions for uStepper Robot Arm Rev 4
  ☆73Updated 4 years ago
• makerbase-mks / MKS-SERVO42A
  Makerbase MKS SERVO42A NEMA17 closed loop stepper motor Driver CNC 3d printer parts prevents losing steps for Gen_L SGen_L
  ☆60Updated 4 years ago
• Seeed-Studio / Seeed_Arduino_AS5600
  The library comes with AS5600. Through this library, we can realize read the angles 、get magnetic from a magnet underneath the sensor.
  ☆122Updated last year
• XRobots / CycloidalDrive
  ☆211Updated 2 years ago
• grblHAL / RP2040
  grblHAL driver for RP2040/RP2350 (Pi Pico, Pi Pico2 etc)
  ☆155Updated this week
• grblHAL / ESP32
  grblHAL driver for ESP32
  ☆121Updated this week
• chilipeppr / robot-actuator-esp32-v8
  This is the repo for the robot actuator v8 based on an ESP32 as the brains of each robot arm actuator.
  ☆232Updated 5 years ago
• Aus3D / RUMBA32
  A powerful 32-bit 3D printer control board.
  ☆74Updated 5 years ago
• maxosprojects / dobot-arm-CAD
  dobot-arm CAD files
  ☆65Updated 9 years ago
• waspinator / AccelStepper
  Fork of AccelStepper
  ☆203Updated last year
• neuroprod / ClosedLoopDriver
  Arduino controler for a closed-loop stepper motor
  ☆87Updated 11 years ago
• uStepper / uStepperS
  ☆53Updated 2 years ago
• fra589 / cn5X
  cn5X++ is a new 5/6 axis Grbl control panel to implement all the grbl-Mega-5X capabilities.
  ☆83Updated last year
• roTechnic / CycloidalDesign
  ☆24Updated 4 years ago
• bdring / 4_Axis_SPI_CNC
  4 Axis CNC Controller for Grbl_ESP32
  ☆69Updated 5 years ago
• gcobos / grblesp
  GRBL ported to ESP8266, using up to 8 axis. No arduino involved
  ☆60Updated 9 months ago
• Smoothieware / Smoothieboard
  ☆176Updated 7 years ago
• bdring / Grbl_ESP32_Development_Controller
  A CNC controller to use and test Grbl_ESP32
  ☆80Updated 5 years ago
• qiayuanl / OpenMGSLS
  Open source Mirror Galvanometer SLS 3D printer.
  ☆76Updated 3 years ago
• deltaxrobot / Delta-X-3D-Printed-Parts
  Delta X 3D Printing Parts will be open-source in March 2020
  ☆68Updated last year
• Chris-Annin / AE1-CNC-engraver-router
  open source 3 axis machine for engraving router or milling
  ☆38Updated 7 years ago
• NiryoRobotics / niryo_one
  ☆404Updated 5 years ago
• gnea / grbl-LPC
  ☆77Updated 3 years ago