waveshare / UPS-Power-ModuleLinks
a ups power module display status server for jetson nano
☆12Updated 3 years ago
Alternatives and similar repositories for UPS-Power-Module
Users that are interested in UPS-Power-Module are comparing it to the libraries listed below
Sorting:
- This is my own kicad library to deal with the assembly services provided by SZ JLC☆11Updated 4 years ago
- Build the Linux Kernel and Modules on board the NVIDIA Jetson Nano Developer Kit☆99Updated last year
- A simple SPI library to interface with Austria Microsystem's AS5048A angle sensor☆27Updated 4 years ago
- Raspberry Pi 5 GPIO Pinout☆75Updated 3 months ago
- Antmicro's open hardware baseboard for the NVIDIA Jetson Nano, TX2 NX and Xavier NX☆514Updated last month
- The library comes with AS5600. Through this library, we can realize read the angles 、get magnetic from a magnet underneath the sensor.☆122Updated last year
- SpryDrive is an affordable actuator based on the quasi-direct drive (QDD) scheme. It is composed of a brushless outrunner motor, a low-co…☆39Updated 4 years ago
- Boot NVIDIA Nano Jetson Developer Kit from a mass storage USB device (Jetson Nano devices A02, B01, 2GB and possibly Jetson TX1)☆133Updated 4 years ago
- Classes for control of a differential drive robot using PID control of DC motors☆49Updated 9 years ago
- A magnetic contactless encoder board for the NEMA 17 motor☆14Updated 6 years ago
- Self balancing robot | Arduino | PlatformIO | MPU6050 | DRV8825 | Nema 17 stepper motor☆30Updated 4 years ago
- ☆110Updated 6 months ago
- The Janus Controller is a Brushless motor driver with an on-board magnetic encoder, a three-phase MOSFET driver, three MOSFET half-bridge…☆132Updated 5 years ago
- ☆58Updated 2 years ago
- Raspberry Pi Compute Module 4 (CM4) Full Library, Design Template&Guideline for Altium Designer☆194Updated 2 years ago
- SparkFun libraries converted for use in KiCAD!☆80Updated 10 years ago
- SCUTTLE™: Sensing, Connected, Utility Transport Taxi for Level Environments [An open-source Mobile Robot]☆87Updated 3 weeks ago
- Simple, open-source ESC that uses the SimonK firmware.☆201Updated 9 years ago
- Testbed code for the Swarm Drive (ESP32 based BLDC motor driver board)☆31Updated 5 years ago
- Serial Plotter for Arduino and other embedded devices.☆100Updated last week
- ROS for ESP8266/ESP32☆46Updated 6 years ago
- Boot NVIDIA Nano Jetson Developer Kit from a mass storage USB device (Jetson Nano devices A02, B01, 2GB and possibly Jetson TX1)☆49Updated 4 years ago
- Arduino library for the ICM-20948 motion tracking sensor -- with DMP support☆74Updated 4 years ago
- ☆22Updated 8 years ago
- With Field Oriented Control (FOC)☆56Updated 2 years ago
- IEEE Reion 1 Micromouse competition.☆67Updated 4 years ago
- Gruvbox for KiCAD - THE FUTURE IS HERE☆53Updated 3 years ago
- simplefoc all-in-one 50W hybrid stepper + bldc driver☆61Updated last month
- ☆269Updated last year
- Small package, low-cost BLDC diver board fully compatible with the simplefoc library☆144Updated last year