vsergeev / sstermLinks
A simple console-based serial port terminal, written in Python.
☆53Updated 4 years ago
Alternatives and similar repositories for ssterm
Users that are interested in ssterm are comparing it to the libraries listed below
Sorting:
- Virtual serial port driver for Linux☆81Updated 8 months ago
- A simple TTY multiplexer.☆120Updated 4 years ago
- A set of python scripts to create dfu files and upload them to stm32 boards☆78Updated 3 years ago
- Flash firmware to STM32 microcontrollers using Python.☆120Updated last year
- Changes I did to make blhost work properly on all platforms☆14Updated 2 years ago
- A Linux kernel driver for ch341 emulating the I2C bus☆118Updated last year
- A Linux command-line alternative to the FTDI FTProg utility for FTDI's FT-X series☆129Updated last year
- Python module to communicate easily with modems and RF modules using AT commands☆29Updated 3 years ago
- ☆150Updated 6 years ago
- linux kernel drivers for ft2232 spi and i2c☆39Updated last year
- Automatically exported from code.google.com/p/mphidflash☆32Updated 2 years ago
- Linux null-modem emulator☆74Updated 3 weeks ago
- PL2303HX Userspace GPIO control tool☆35Updated 5 years ago
- ☆46Updated 3 years ago
- Linux kernel LIN bus support implemented as TTY line discipline for generic UART conrollers, documentation https://github.com/lin-bus/li…☆43Updated 2 months ago
- Kernel module for handling Atmel crypto chip (ATSHA204)☆24Updated 10 years ago
- A basic NMEA GPS parser designed and tested with the u-Blox MAX-8 series of GPS receiver connected to a Raspberry Pi.☆23Updated 8 months ago
- Typed pure Python library to parse HID report descriptors☆48Updated last week
- USB HID Sensor implementation for PIC16F1454 and STM32F072☆35Updated 3 years ago
- jpnevulator is a handy serial sniffer. You can use it to send data on a serial device too. You can read or write from/to one or more seri…☆122Updated 3 years ago
- API for accessing classic CAN and ISO CAN FD controller☆49Updated this week
- The tool is used to download an image to Freescale/NXP IMX platform to run.☆15Updated 7 years ago
- minimalistic terminal program for communicating with devices over a serial connection☆49Updated last month
- A Linux kernel driver for ch341 emulating the I2C bus☆74Updated 4 years ago
- Quectel Linux Driver for WCDMA, LTE and 5G Modules☆68Updated 6 years ago
- Software-based serial port module for Raspberry Pi.☆174Updated last year
- Simple Management Protocol (SMP) Client for remotely managing MCU firmware☆24Updated 3 weeks ago
- gs_usb compatible firmware for candleLight, cantact and canable☆24Updated 6 years ago
- A clone of the i2c-tiny-usb based upon STM32 and libopencm3☆139Updated last year
- C-based firmware loader for STM32's serial bootloader☆93Updated 8 years ago