Seeed-Studio / pi-hatsLinks
The repository is the seeed studio's RPI hats driver.
☆46Updated 7 months ago
Alternatives and similar repositories for pi-hats
Users that are interested in pi-hats are comparing it to the libraries listed below
Sorting:
- Device Tree Overlays for Seeed boards☆92Updated last month
- Linux kernel LIN bus support implemented as TTY line discipline for generic UART conrollers, documentation https://github.com/lin-bus/li…☆42Updated last year
- Improved OV5640 for Orange Pi (H3) / Nano Pi (H3) / Banana Pi M64 / Pine64+ / Nano Pi M2/M3 (Experimental)☆28Updated 8 years ago
- GUI Configuration tool for WIZnet serial to ethernet devices.☆22Updated 4 months ago
- MCU driver/HAL for the Picocell Gateway concentrator board.☆53Updated 6 years ago
- CAN driver project for the Espressif ESP32☆27Updated 4 years ago
- Yocto Layer which provides basic support for Quectel wireless modules☆35Updated 4 years ago
- RTIMULib makes it easy to use 9-dof IMUs with embedded Linux systems (especially the Raspberry PI!)☆48Updated 4 years ago
- USB-CAN Analyzer Linux Support☆63Updated 5 months ago
- RAKwireless,BLE5.0,LoRaWAN,nRF52832,GPS,MEMS,LCD,RAK815☆2Updated 5 years ago
- ☆22Updated 4 years ago
- Blinky example for Mbed OS 6.0☆42Updated 2 years ago
- WaRP7 User Guide Source. For binary releases go to the release tab☆12Updated 7 years ago
- Yocto BSP meta layer for the UP Board☆29Updated 4 years ago
- Linux kernel PPS generator using GPIO pins☆35Updated last year
- Design and documentation of hardware☆19Updated this week
- A BLE tool library to decode some advertising data in object mode (used on ESP32 and Pycom modules)☆32Updated 2 years ago
- ☆24Updated 5 years ago
- An inexpensive Open Source blackmagic probe compatible SWD debugger designed to be used with ARM GDB.☆35Updated 6 years ago
- DISCONTINUED (October 2022): the maintenance for this repository has been discontinued. Please refer to https://github.com/STMicroelectr…☆77Updated 2 years ago
- UBX protocol implementation based on C language for u-blox© GNSS chips☆22Updated 5 years ago
- JTAG/SWD debugger + UART adapter based on the Black Magic Probe firmware☆22Updated last week
- ☆39Updated last year
- ☆30Updated 8 years ago
- An Arduino library for BLE Serial/UART using ArduinoBLE.☆23Updated last year
- General information about the balenaFin including design files, software support, and more☆47Updated 2 years ago
- TensorFlow package for Cortex-M0-Plus, Cortex-M4, Cortex-M7, and Cortex-M55 CPUs.☆41Updated 11 months ago
- Edge Impulse firmware for the ST B-L475E-IOT01A development board☆28Updated this week
- Microchip mcp251x Linux CAN driver with hardware filtering for the Raspberry PI☆32Updated 3 years ago
- Code repository for Yocto for Raspberry Pi, published by Packt☆35Updated 2 years ago