themrleon / RpiSoft-UARTLinks
A Raspberry Pi / BCM2835 Software-based UART Linux device driver
☆133Updated 2 years ago
Alternatives and similar repositories for RpiSoft-UART
Users that are interested in RpiSoft-UART are comparing it to the libraries listed below
Sorting:
- Software-based serial port module for Raspberry Pi.☆170Updated last year
- Enables GSM 0710 multiplex using n_gsm line dicipline☆58Updated 2 years ago
- Broadcom WICED patches for MXCHIP EMW wireless ARM platform. Not affiliated with MXCHIP or Broadcom☆55Updated 5 years ago
- ☆105Updated 7 years ago
- libsoc: C library for interfacing with common SoC peripherals through generic kernel interfaces☆160Updated 10 months ago
- Yocto Layer which provides basic support for Quectel wireless modules☆35Updated 4 years ago
- A Logic Analyzer based on the RaspberryPi☆161Updated 11 years ago
- Nordic stack and drivers for the mbed BLE_API☆46Updated 5 years ago
- Starting point and shared code for Nordic nRF5x BLE platforms.☆91Updated 4 years ago
- C-based firmware loader for STM32's serial bootloader☆94Updated 8 years ago
- omap image builder☆159Updated last week
- U-Boot for Cortex-M3 and Cortex-M4☆185Updated 6 years ago
- ☆165Updated 5 years ago
- Access Dallas 1-Wire bus on your PC via low-cost USB to UART bridge.☆162Updated 8 years ago
- mirror of git://git.denx.de/u-boot.git☆86Updated 2 years ago
- Linux kernel module driver for the ESP8089 WiFi chip☆193Updated 11 months ago
- API to abstract working with Bluetooth Smart Controllers☆83Updated 8 years ago
- ESP8266 lwIP library with NAT, SLIP, ENC28j60 Ethernet, and routing support☆70Updated 5 years ago
- Simple example application showing how to do a custom service. Fully explained in nAN-36, available on www.nordicsemi.com.☆93Updated 7 years ago
- Port of Eclipse Paho C client on ESP8266☆51Updated 8 years ago
- Experimenting with Bluez☆97Updated 4 years ago
- Python wrapper for Segger's J-Link Commander & STMicro STLink V2 to flash various ARM MCUs☆124Updated 5 years ago
- Image builder☆169Updated last week
- Open source code base for the ARM Cortex M0+ LPC810 family from NXP☆86Updated 3 years ago
- Embedded AT/GSM stack. Work in progress.☆55Updated 9 years ago
- crosstool-NG with support for Xtensa☆108Updated last year
- (Depricated!) Examples are now located in the ble_examples repository.☆1Updated 8 years ago
- Example host application (written in C code) for nRF5 Serial UART DFU☆30Updated 6 years ago
- A gatt client, based on bluez stack -- just using socket☆46Updated 9 years ago
- LoRa device driver as a kernel module☆138Updated 6 years ago