tat / eeprog
eeprog is a Linux C program that allows you to read and write to 24Cxx EEPROMs.
☆14Updated last year
Alternatives and similar repositories for eeprog:
Users that are interested in eeprog are comparing it to the libraries listed below
- xc3sprog is a suite of utilities for programming Xilinx FPGAs, CPLDs, and EEPROMs with the Xilinx Parallel Cable and other JTAG adapters …☆17Updated 5 years ago
- PCBs designed by Icenowy☆27Updated 3 years ago
- Port Allwinner xradio driver to mainline Linux.☆23Updated 6 years ago
- A single-board computer based on AT91SAM9260-QU, without BGA☆9Updated 7 years ago
- SPI NOR flash programmer using Blue Pill (STM32 development board)☆18Updated 6 years ago
- USB-PD firmware for the stm32f072 - forked from https://git.clayhobbs.com/pd-buddy/pd-buddy-firmware☆30Updated 5 years ago
- FX2 replacement for USB-Blaster from http://fpga4u.epfl.ch/wiki/FX2☆22Updated 10 years ago
- Release KiteRF is a SDR system with K210 & FPGA & ESP32 as its core controller, which make SDR more intelligent, portable and cheap.☆22Updated 4 years ago
- advanced u-boot (for sunxi Orange Pi Zero | Zero Plus2 h3 | R1, and another sunxi boards ), ready for full load linux from spi-flash, i2c…☆35Updated 5 years ago
- 8051 microcontroller☆37Updated 7 years ago
- ☆26Updated 5 years ago
- Free Libre Open-Source/-Hardware JTAG/UART adapter based on FTDI2232H☆31Updated 8 years ago
- Userspace utility to set sunxi disp2 HDMI resolution via ioctl☆21Updated 7 years ago
- photonSDI - an open source SDI core☆10Updated 3 years ago
- Chipcon 1101☆21Updated last year
- WCH CH569 SerDes Reverse Engineering☆26Updated 2 years ago
- USB-OTG Keyboard on STM32F4-Discovery☆33Updated 10 years ago
- ☆18Updated 4 years ago
- Opensource embedded controller firmware for sipeed boards.☆33Updated 5 years ago
- Reverse engineered reimplementation of the CSR USB<>SPI converter device on a Stellaris Launchpad. Will work with the original CSR driver…☆57Updated 11 years ago
- Buildroot for the LicheePi Zero board☆35Updated 6 years ago
- Port of https://github.com/eleqian/WiDSO/tree/master/MCU/USB-Blaster to GCC and "traditional" STM32F103C8T6 Bluepill board.☆42Updated 5 years ago
- USB Power Delivery Protocol Analyzer GUI☆25Updated 3 years ago
- Opensource embedded controller firmware for sipeed boards.☆13Updated 5 years ago
- RDA5981A RDA5981AM RDA5981C☆31Updated 4 years ago
- Firmware for the FX2 which emulates the FTDI serial chips (including MPSSE support).☆13Updated 6 years ago
- FX2 EZ USB eeprom reader/writer for libusb☆29Updated last year
- SPI kernel driver for ESP8089 devices☆15Updated 10 years ago
- MIPI Display Master Bridge IC Driver and Application Development☆20Updated 10 years ago
- Bare metal programming on the EBAZ4205 board with Zynq XC7Z010 SoC☆14Updated last month