Alternatives and similar repositories for stm32h

Users that are interested in stm32h are comparing it to the libraries listed below

• kaidegit / CMSIS-DAPbyWCH
  a cheap CMSIS-DAP debugger by an WCH chip named CH549F
  ☆45Updated 4 years ago
• m3y54m / cjmcu-ft232hq-programmer
  FT232H-based JTAG, SWD, and AVR-ISP Programmer (Supported by OpenOCD and AVRDUDE)
  ☆30Updated last year
• rep-stosw / t113-ddr-decompiled
  Decompiled DDR memory init for Allwinner Tech T113-s3 SoC
  ☆11Updated 2 years ago
• jeanthom / stlink-tool
  Firmware uploader for ST-Link
  ☆68Updated last year
• dl3yc / fx2fw-sdcc
  FX2 replacement for USB-Blaster from http://fpga4u.epfl.ch/wiki/FX2
  ☆22Updated 10 years ago
• mikechambers84 / STM8-Emulator
  An STM8 microcontroller emulator and hardware design simulator.
  ☆24Updated 3 years ago
• newbrain / riscv-openocd-wch
  This is the OpenOCD source code modified to support WCHlink and CH32Vxxx MCUs, received from MounRiver after my GPL request, and publishe…
  ☆18Updated 2 years ago
• lujji / blackmagic
  In application debugger for ARM Cortex microcontrollers.
  ☆32Updated 8 years ago
• sigrokproject / sigrok-firmware-fx2lafw
  Read-only mirror of the official repo at git://sigrok.org/sigrok-firmware-fx2lafw. Pull requests welcome. Please file bugreports at sigro…
  ☆47Updated last year
• majbthrd / elf2dfuse
  STM32 ELF to DfuSe converter
  ☆31Updated 5 years ago
• ataradov / vcp
  A collection of Virtual COM-Port implementations
  ☆24Updated 2 years ago
• WeActStudio / WeActStudio.STM32G474CoreBoard
  ☆23Updated 10 months ago
• lujji / st-link-dumper
  ST-Link dumper firmware
  ☆52Updated last year
• WeActStudio / WeAct_HID_Bootloader_F4x1
  WeAct_HID_Bootloader_F4x1 base on STM32_HID_Bootloader
  ☆43Updated 5 years ago
• ataradov / dgw
  USB HID Data Gateway
  ☆53Updated 4 years ago
• Fescron / universal-jlink-adapter
  20 pin SWD/JTAG J-Link to 10 pin (0.1" and 0.05") reconfigurable Cortex-M header with power supply and TagConnect compatibility, as well …
  ☆77Updated 2 months ago
• cjacker / wchlinke-mode-switch
  Deprecated, use 'wlink' instead. Command line tool to switch WCH-LinkE modes between DAP and RV from host.
  ☆10Updated 6 months ago
• kprasadvnsi / ch55x_bare_metal
  Simple peripheral library for CH55x microcontrolles
  ☆16Updated 4 years ago
• ivanovp / blue_flash
  SPI NOR flash programmer using Blue Pill (STM32 development board)
  ☆19Updated 7 years ago
• homemcu / stm-bare-metal
  Examples of common device drivers for different MCUs (STM8, STM32) with separate bare metal hardware abstraction layers.
  ☆20Updated 4 years ago
• kprasadvnsi / riscv-openocd-wch
  OpenOCD source code for CH32V series MCUs released by Mounriver IDE
  ☆54Updated 3 years ago
• henrycoding / cklink-lite
  ☆15Updated 2 years ago
• libusbhost / libusbhost
  Open source USB host stack for embedded devices
  ☆61Updated 4 years ago
• cortexprog / cortexprogfw
  ☆27Updated 4 years ago
• martinribelotta / imxrt1020-module
  iMX RT 1020 CPU module
  ☆34Updated 5 years ago
• rumpeltux / stm8s-sdcc-examples
  Example codes using sdcc to target STM8S MCUs.
  ☆45Updated 5 years ago
• lujji / st-decrypt
  Utility for encrypting/decrypting ST-Link firmware images
  ☆116Updated 8 years ago
• tejv / USBCx
  USB Power Delivery Protocol Analyzer GUI
  ☆26Updated 3 years ago
• hydrausb3 / riscv-none-elf-gcc-xpack
  A binary xPack with the GNU RISC-V Embedded GCC toolchain with support of WCH RISCV CH56x... "WCH-Interrupt-fast"
  ☆14Updated 2 years ago
• mvirkkunen / dwprog
  Program AVR devices with debugWIRE over just the RESET pin.
  ☆16Updated 5 years ago