Alternatives and similar repositories for PylonToMQTT:

Users that are interested in PylonToMQTT are comparing it to the libraries listed below

• syssi / esphome-pace-bms
  ESPHome component to monitor and control a PACE Battery Management System (PACE-BMS) via RS485 (Modbus)
  ☆45Updated last month
• sshoecraft / jbdtool
  JBD BMS Linux utility
  ☆59Updated 9 months ago
• SeByDocKy / pvbrain2
  ☆30Updated last week
• tomatensaus / DeyeSolarDesktop
  Home Assistant bootstrap for monitoring solar for Deye/Sunsynk/Sol-Ark
  ☆61Updated last month
• byte4geek / SEPLOS_MQTT
  Read data From Seplos BMS and send them to the Home Assistant
  ☆42Updated last year
• syssi / esphome-virtual-can-bms
  ESPHome component to emulate a SMA/Victron compatible BMS via CAN bus
  ☆13Updated 6 months ago
• justinschoeman / dalybms
  Interface layer for Daly Smart BMS
  ☆20Updated 3 years ago
• syssi / esphome-soyosource-gtn-virtual-meter
  ESPHome component to simulate the current clamp to control the Soyosource GTN1200 limiter
  ☆81Updated last month
• Frankkkkk / python-pylontech
  Python lib to talk to pylontech lithium batteries 🔋 (US2000, US3000, ...) using RS485
  ☆73Updated last year
• syssi / esphome-seplos-bms
  ESPHome component to monitor a Seplos Battery Management System (Seplos-BMS) via UART or RS485
  ☆78Updated last month
• ArminJo / JK-BMSToPylontechCAN
  Converts the JK-BMS RS485 data to Pylontech CAN data
  ☆74Updated 4 months ago
• loopyengineeringco / Daly2Sofar
  ESP32 bridge allowing Daly Smart BMS to be used with a Sofar inverter/charger (and others that use SMA CANBUS protocol).
  ☆31Updated last year
• softwarecrash / EPEver2MQTT
  ESP82XX based connector for EPEver Solar tracker systems, control and watch Multiple devices over webinterface and MQTT
  ☆48Updated 4 months ago
• ferelarg / Seplos3MQTT
  Python script to connect a battery pack using BMS Seplos v3.0 to MQTT
  ☆13Updated 10 months ago
• Sleeper85 / esphome-jk-bms-can
  ☆98Updated 3 months ago
• syssi / esphome-solax-x1-mini
  ESPHome component to monitor a Solax X1 mini via RS485
  ☆39Updated 6 months ago
• hidaba / PylontechMonitoring
  Adding WiFi monitoring to US2000B , US2000C , US5000 batteries.
  ☆20Updated last month
• Ackmaniac / esphome-jk-bms-can
  ESPHome component to monitor a Jikong Battery Management System (JK-BMS) via RS485 or BLE, CAN bus Goodwe/Pylon
  ☆15Updated 4 months ago
• Tertiush / bmspace
  Pace Battery Management System
  ☆51Updated 4 months ago
• scottwday / InverterOfThings
  ESP8266 based WiFi interface for Voltronic Axpert MppSolar PIP inverters
  ☆41Updated 3 years ago
• chickey / RS485-WiFi-EPEver
  This project is for connecting to EPEver charge controllers over WiFi for viewing running stats and also allows automatic posting of them…
  ☆69Updated 6 months ago
• daromer2 / InverterOfThings
  ESP8266 based WiFi interface for Voltronic Axpert MppSolar PIP inverters
  ☆27Updated 2 years ago
• tgalarneau / bms
  JBD BMS and Thornwave bluetooth data monitoring
  ☆44Updated 3 years ago
• syssi / esphome-pipsolar
  ESPHome component to monitor and control a pipsolar inverter via RS232
  ☆113Updated last month
• NEEY-electronic / JK
  ☆61Updated 2 years ago
• mletenay / home-assistant-pylontech
  Home Assistant custom component for Pylontech (high voltage) BMS accessed via console
  ☆16Updated 7 months ago
• juamiso / PYLON_EMU
  Python script to emulate the outgoing CAN bus traffic from a Pylontech LFP battery pack (48V)
  ☆42Updated 3 years ago
• opengd / solar-sis
  solar serial inverter system
  ☆33Updated last year
• softwarecrash / Victron2MQTT
  Little Program for ESP82XX to get the Victron data to web and MQTT
  ☆62Updated last month
• maxx-ukoo / jk-bms2pylontech
  JK BMS to PYLON CANBUS Protocol converter
  ☆33Updated 2 years ago