ReclaimerLabs / USB_PDLinks
USB Power Delivery library
☆85Updated 7 years ago
Alternatives and similar repositories for USB_PD
Users that are interested in USB_PD are comparing it to the libraries listed below
Sorting:
- Dev board for USB-C and Power Delivery☆147Updated 4 years ago
- USB-C Power Delivery on Arduino☆93Updated 5 years ago
- A standalone library for the FUSB302 USB-C Power Delivery PHY☆108Updated 7 years ago
- A breakout board for the FUSB302 USB Power Delivery PHY☆109Updated 6 years ago
- USB-PD firmware for the stm32f072 - forked from https://git.clayhobbs.com/pd-buddy/pd-buddy-firmware☆31Updated 5 years ago
- CMSIS-DAP USB-SWD/JTAG adapter firmware for Pro Micro and Teensy 3.2 boards☆90Updated 2 years ago
- Utility for encrypting/decrypting ST-Link firmware images☆123Updated 9 years ago
- In application debugger for ARM Cortex microcontrollers.☆32Updated 8 years ago
- Serial bootloader for STM8 microcontrollers☆97Updated 6 months ago
- ST-Link dumper firmware☆53Updated last year
- Firmware uploader for ST-Link☆70Updated last year
- A stable ESP8266 port of OpenOCD☆54Updated 5 years ago
- eMMC WFBGA153 to microSD card adapter PCB☆67Updated last year
- Hardware design files for the Black Magic Probe☆128Updated 3 years ago
- 8051 microcontroller☆40Updated 7 years ago
- Autonomous USB-C PD controller for Power Sink applications (from Vbus=5V to 20V)☆123Updated 3 years ago
- 7.2MHz logic analyzer speaking the SUMP protocol for the stm32f103☆90Updated 4 years ago
- KiCad libraries generated from the STM32Cube database.☆61Updated 5 months ago
- Design files for an HDMI to MIPI-DSI adapter with support for the LG LH550WF1-SD01 LCD panel☆65Updated 2 years ago
- Compact ESP32-S2 development board.☆103Updated 4 years ago
- Main Probe Scope PCB Repo☆57Updated 6 years ago
- ESP32/8266 Arduino as (X)SVF JTAG programmer☆47Updated 6 years ago
- Open-Source Oscilloscope based on STM32F3-DISCOVERY board☆37Updated 4 years ago
- Anotter USB temperature logger that can record up to four channels with thermocouple or NTCs connected via CDC directly or SCPI to USB.☆63Updated 2 years ago
- A Qi wireless power receiver using attiny13☆57Updated 6 years ago
- Easy PDK programmer for PADAUK microcontroller☆116Updated 10 months ago
- Alternative firmware for a cheap X-40 laser tape measure☆131Updated 3 months ago
- KiCad library and templates for creating designs with Mini-PCI-express cards (both the cards and sockets).☆104Updated 7 years ago
- ESP32 IDF component for SWD communication☆68Updated 4 years ago
- Set the voltage of a Quick Charge 2.0 source via the Arduino.☆68Updated 8 years ago