adafruit / Adafruit_AdalinkLinks
Python wrapper for Segger's J-Link Commander & STMicro STLink V2 to flash various ARM MCUs
☆124Updated 5 years ago
Alternatives and similar repositories for Adafruit_Adalink
Users that are interested in Adafruit_Adalink are comparing it to the libraries listed below
Sorting:
- WS2812(Neopixel) library for the Nordic Semiconductor 51822 Bluetooth Low Energy ARM SoC.☆60Updated 6 years ago
- port of free-DAP to standalone arduino☆79Updated 10 months ago
- Nordic nRF52832 BLE development board with sensors.☆96Updated 6 years ago
- Powerdown examples for the nRF51, showing wakeup from system on with RTC and GPIO and from system off from GPIO.☆61Updated 9 years ago
- SAM Boot Assistant Reloaded - Combo USB CDC+MSD Bootloader for Atmel/Microchip SAMD21 microcontroller☆32Updated 7 years ago
- Starting point and shared code for Nordic nRF5x BLE platforms.☆91Updated 4 years ago
- A protocol agnostic library for HopeRF's RFM69 modules and STM32 controllers☆67Updated 8 years ago
- USB Mass Storage bootloader (based on UF2) for SAMD21 and SAMD51☆257Updated 9 months ago
- This is a fork from arduino/ArduinoCore-samd on GitHub. This will be used to maintain Arduino support for SAM D|L|C (M0+ and M4F) boards …☆108Updated last year
- 1kByte USB DFU Bootloader for SAMD11 / SAMD21☆99Updated last year
- Nordic stack and drivers for the mbed BLE_API☆46Updated 5 years ago
- DFU Bootloader for Atmel SAM D21 and similar☆23Updated 8 years ago
- Olimex KiCAD components and footprints☆71Updated 4 months ago
- ☆32Updated 9 years ago
- A stable ESP8266 port of OpenOCD☆54Updated 5 years ago
- CMSIS-DAP USB-SWD/JTAG adapter firmware for Pro Micro and Teensy 3.2 boards☆90Updated 2 years ago
- Wrapper for the Segger J-Link or STLink/V2 (via OpenOCD) to flash nRF51822 MCUs☆41Updated 9 years ago
- Breakout board for the Nordic nRF52832, a BLE/ANT/2.4GHz, Cortex-M4F SoC.☆75Updated 4 years ago
- Setup and install for ARMinARM board.☆29Updated 9 years ago
- Small breadboard friendly STM32 (eventually other mcu's too) eval boards with exposed JTAG and SWD for the use with Black Magic Probe and…☆66Updated 5 years ago
- nRF24L01+ bootloader for avr and other mcus☆108Updated last year
- ☆82Updated 3 years ago
- A set of python scripts to create dfu files and upload them to stm32 boards☆78Updated 3 years ago
- USB Power Delivery library☆85Updated 7 years ago
- Code, final versions, and information on the SparkFun Graphical Datasheets☆146Updated 10 months ago
- Custom scripts and libraries for Eagle PCB☆65Updated 2 years ago
- An inexpensive Open Source blackmagic probe compatible SWD debugger designed to be used with ARM GDB.☆34Updated 6 years ago
- Broadcom WICED patches for MXCHIP EMW wireless ARM platform. Not affiliated with MXCHIP or Broadcom☆55Updated 5 years ago
- Access Dallas 1-Wire bus on your PC via low-cost USB to UART bridge.☆165Updated 8 years ago
- Modified version of Nordic's nrfutil 0.5.x for use with the Adafruit Feather nRF52☆103Updated last year