Alternatives and similar repositories for jktool

Users that are interested in jktool are comparing it to the libraries listed below

• jblance / jkbms
  repo with attempts to test connectivity to JK-BMS via BLE
  ☆29Updated 2 years ago
• SunshadeCorp / can-service
  Simulate a BYD Battery-Box Premium HVS over CAN Bus to use a custom battery with your inverter. Controllable via MQTT.
  ☆35Updated 9 months ago
• bres55 / Smart-BMS-arduino-Reader
  ☆62Updated 6 years ago
• NEEY-electronic / JK
  ☆65Updated 3 years ago
• jamiejones85 / ESP32-BMS
  An ESP32 based BMS master for CAN based remote boards. Makes use of SimpBMS code for decoding the module data messages.
  ☆16Updated 2 years ago
• botaneta / JKbms_Emu_Pylon
  Emulación del protocolo CANBUS de Pylontech, para comunicación con inversores fotovoltaicos, usando un ESP32
  ☆13Updated 2 months ago
• dalathegreat / Nissan-Leaf-Battery-to-OBD2
  An opensource solution for connecting OBD2 straight to the Nissan Leaf battery
  ☆65Updated last year
• sebdehne / DehneEVSE-Hardware
  DehneEVSE - EV Type 2 Charging station
  ☆17Updated 4 years ago
• daromer2 / InverterOfThings
  ESP8266 based WiFi interface for Voltronic Axpert MppSolar PIP inverters
  ☆31Updated 3 years ago
• kortas87 / simple-evse
  Automatically exported from code.google.com/p/simple-evse
  ☆44Updated 10 years ago
• playersz28 / JBD-ESP32
  ESP32 interface for JBD BMS
  ☆12Updated 3 years ago
• meteosat007 / solar-pylontech
  How to connect to a Sofar HYD3600 Inveter and 2 Pylontech US3000 batteries
  ☆20Updated 5 years ago
• tomwetjens / ArduinoEVSE
  A simple EVSE (electric vehicle supply equipment or "wall charger") built using an Arduino and open source software.
  ☆12Updated last year
• ArminJo / JK-BMSToPylontechCAN
  Converts the JK-BMS RS485 data to Pylontech CAN data
  ☆97Updated 7 months ago
• loopyengineeringco / Daly2Sofar
  ESP32 bridge allowing Daly Smart BMS to be used with a Sofar inverter/charger (and others that use SMA CANBUS protocol).
  ☆33Updated last year
• MyLab-odyssey / ED_BMSdiag
  Retrieve battery diagnostic data from your smart electric drive EV.
  ☆57Updated 3 years ago
• openenergymonitor / open_evse
  Firmware for OpenEnergyMonitor OpenEVSE
  ☆18Updated 3 years ago
• damienmaguire / VW-OnBoard-Charger
  Hacking and reverse engineering of the VW Onboard AC chargers
  ☆15Updated 2 years ago
• Longan-Labs / Longan_CAN_MCP2515
  Arduino Library for CAN Bed
  ☆28Updated 4 years ago
• atc1441 / CustomCanDecoderBox
  ☆42Updated 5 years ago
• dev-lab / esp-iot-mbus
  M-Bus gateway with web server based on ESP8266 NodeMCU
  ☆27Updated 7 months ago
• Sgw32 / BMSCtl
  ANT BMS (antBMS) control panel on C# with UART capability. I hacked protocol and reverse-engineered it.
  ☆22Updated 4 years ago
• damienmaguire / BMW_SBox
  Reverse Engineering of the BMW SBox for use in ev conversion projects
  ☆13Updated 2 years ago
• PhilippFux / ESP32_CAN_Interface
  CAN_Interface for ESP32 (Cannelloni Protocol)
  ☆59Updated 4 years ago
• jsphuebner / esp32-web-interface
  ☆20Updated 7 months ago
• iternio / ev-obd-pids
  This repository contains OBD PID Lists known to ABRP, as available by their individual licenses.
  ☆38Updated 2 years ago
• kolins-cz / Smart-BMS-Bluetooth-ESP32
  Program to read out and display data from xiaoxiang Smart BMS over Bluetooth Low Energy
  ☆117Updated last year
• maxx-ukoo / jk-bms2pylontech
  JK BMS to PYLON CANBUS Protocol converter
  ☆40Updated 3 years ago
• nickn17 / evDash
  EV dashboard - software for small dev boards connected to the car via obd2 BLE4 or CAN bus.
  ☆155Updated 3 months ago
• Cellgalvano / ESP32_CANViewer
  A ESP32 based CAN interface for your webbrowser
  ☆27Updated 4 years ago