Alternatives and similar repositories for OBD2_STM32F103C6_ESP

Users that are interested in OBD2_STM32F103C6_ESP are comparing it to the libraries listed below

• RudolphRiedel / USB_CAN-FD
  This is an Open Source Hardware USB to CAN-FD Interface
  ☆73Updated 7 months ago
• arturlangner / Open-OBD2-datalogger
  Plug-in datalogger that saves live engine data to SD card.
  ☆23Updated 7 years ago
• karlyamashita / common_libraries
  These are reusable libraries. You'll need to include the LSP.h file and remove comment for what you need.
  ☆30Updated this week
• SvetlAl / STM32_LIN_FDCAN_TOOL
  LIN, FD-CAN hacker: Gateway+filter+tools. Based on STM32F105 STM32F205 STM32F407 STM32H730
  ☆25Updated last year
• kkuchera / canalyze-fw
  Firmware for the CANalyze hardware.
  ☆69Updated last year
• SeeedDocument / USB-CAN-Analyzer
  ☆117Updated last year
• jgressmann / supercan
  This is project SuperCAN. An open source USB to CAN-FD protocol.
  ☆89Updated 2 months ago
• TDahlmann / canpp
  CAN bus analyzing and simulation GUI tool for Windows.
  ☆74Updated 8 months ago
• marcinbor85 / can-prog
  Command-line tool to flashing devices by CAN-BUS
  ☆86Updated 5 years ago
• omarKmekkawy / TIVAC_TM4C123G_SMBUS_BMS_INTERFACING
  Interfacing Laptop BMS With TIVAC TM4C123G
  ☆35Updated 3 years ago
• aroongta / CANBUS_Decoder
  This repository contains a CAN-BUS data logger and data decoder-parser script.
  ☆10Updated 5 years ago
• mitchdetailed / Log-CANverter
  Turn CANbus Log files into CSV files for analysis using a supporting DBC file
  ☆24Updated this week
• DailyDuino / STM32-CAN-bus-example-rx-tx
  STM32 CAN bus example
  ☆42Updated 5 years ago
• omarKmekkawy / CANBus_SaleaeLogic_Analyzer
  Sniffing CAN Bus with Saleae Logic Analyzer
  ☆19Updated 4 years ago
• jakka351 / Ford-ECU-Bruteforcer
  Bruteforce Security Access on Ford ECU's
  ☆41Updated 2 months ago
• aeonSolutions / AeonLabs-AI-Volvo-MKII-Open-Hardware
  Volvo MKII Open Hardware
  ☆148Updated 11 months ago
• qnx425 / PIC18FXXK80-CAN-Bootloader
  CAN Bootloader for PIC18FXXK80 family devices
  ☆15Updated 6 years ago
• AasaiAlangaram / Python-LIN-Diagnostic-Tool
  One can use this project to build their own LIN Analyzer.
  ☆19Updated last year
• DanielMartensson / GoobySoft
  General software for logging and controlling devices. Controlling Modbus, CAN bus via STM32PLC etc
  ☆38Updated 5 months ago
• Longan-Labs / Longan_CANFD
  Arduino library for CAN-FD Shield, base on MCP2517FD/MCP2518FD and MCP2542
  ☆34Updated 3 years ago
• DieselDuz42 / Arduino-CAN-bus-SD-logger
  Arduino script to log CAN bus information to SD card. Mainly focused on J1939.
  ☆25Updated 5 years ago
• damienmaguire / Tesla-Model-3-Drive-Unit
  Open Source logic board for the Tesla Model 3 rear drive unit. PCB Files in DesignSpark 8 format.
  ☆65Updated last week
• kentindell / canis-can-sdk
  Canis Labs CAN SDK
  ☆44Updated 8 months ago
• linklayer / cantact-pro-fw
  Firmware for the CANtact Pro
  ☆47Updated 2 years ago
• ryedwards / budgetcan-fw
  Firmware to support gs_usb on most STM32 devices
  ☆49Updated last month
• connorwm / J1850VPW
  Arduino Code (eventually library) for communicating with J1850 VPW OBD-II equipped cars.
  ☆21Updated 10 years ago
• coniferconifer / ESP32-ECU-emulator
  ECU emulator by ESP32 with TJA1050 for OBD2 print test
  ☆56Updated last year
• nopnop2002 / esp-idf-CANBus-Monitor
  Monitor Canbus traffic
  ☆130Updated 4 months ago
• atc1441 / arduino-mcp2515
  Arduino MCP2515 CAN interface library
  ☆40Updated 5 years ago
• collin80 / can_common
  Common structures and functionality for CAN libraries
  ☆140Updated last year