sparkfun / LSM9DS0_BreakoutLinks
A breakout board for ST Micro's LSM9DS0 -- a 3D accelerometer, gyroscop, and magnetometer.
☆25Updated 10 years ago
Alternatives and similar repositories for LSM9DS0_Breakout
Users that are interested in LSM9DS0_Breakout are comparing it to the libraries listed below
Sorting:
- Eddie the Balance Bot☆63Updated 8 years ago
- Tiny BLE is a Bluetooth Low Energy board designed with low energy consumption and small size in mind.☆31Updated 10 months ago
- Raspberry Pi Camera Module Multiplexer☆79Updated 6 years ago
- Machine Learning Open Source Robot☆65Updated 10 years ago
- ☆68Updated 7 years ago
- Arduino sketch for MPU9150 9DoF with AHRS sensor fusion☆76Updated 11 years ago
- HR-OS1 Framework, based on the Darwin-OP project. Intended for use on HR-OS1 Humanoid Robot platforms.☆55Updated 8 years ago
- Piloting firmware and Kalman Filter localization software for Arduino quadrotors.☆30Updated 8 years ago
- Git repository for the Balanduino balancing robot☆135Updated 3 years ago
- Resources for RBL nRF51822 development board.☆10Updated 8 years ago
- The reference template that all mezzanine stacks adhere to.☆28Updated 11 years ago
- MPU9250 Accelerometer Driver for Arduino☆97Updated 9 years ago
- This repository contains sample code demonstrating different features and functions of the LIDAR-Lite Sensor☆72Updated 8 years ago
- Hacking of the Neato XV-11 lidar☆85Updated 5 years ago
- Intel Academic IoT course - board setup, labs and projects☆36Updated 9 years ago
- Teensiduino sketch for 9-axis BNO055 motion sensor + MS5637 pressure sensor☆56Updated 9 years ago
- Arduino/Processing sketch for GY80 9DOF AHRS☆22Updated 12 years ago
- BeagleBoard.org BeagleBone Blue - BeagleBone optimized for educational robotics☆39Updated 5 years ago
- Monster Moto Shield available from SparkFun Electronics.☆30Updated 5 years ago
- LSM9DS0 9DOF sensor AHRS sketch☆39Updated 8 years ago
- This is the Arduino version of the code for my balancing robot/segway☆78Updated 12 years ago
- Arduino-compatible (teensyduino) firmware for the Flybrix flight board.☆70Updated 5 years ago
- Take raw IR signal from a remote receiver and print out pulse lengths☆165Updated last year
- Arduino library for the LSM9DS0 9DOF IMU.☆10Updated 3 years ago
- Use Arduino IDE to develop STM32 MCU (e.g. RedBear Duo) firmware.☆56Updated 7 years ago
- Arduino program for building an AHRS with a Pololu MinIMU-9☆141Updated 4 years ago
- Resources for the BLE Nano & MK20 USB Dongle.☆43Updated 8 years ago
- An autopilot for Linux-based computers based on the BeagleBone (Black)☆109Updated 9 years ago
- Active motion capture suit which reads data from IMUs in real time and sends them to Blender over Bluetooth. Low cost and open-source☆121Updated 9 years ago
- The budget balance bot project - a sub £50 easybuild balance bot / balancing robot platform with bluetooth control☆29Updated 11 years ago