neggles / esp32-cantrollerLinks
ESP32-S2-WROVER/WROOM based CANBUS controller thingy.
☆10Updated 2 years ago
Alternatives and similar repositories for esp32-cantroller
Users that are interested in esp32-cantroller are comparing it to the libraries listed below
Sorting:
- Software, hardware and protocol information for the Eltek Flatpack2.☆49Updated 6 years ago
- ☆103Updated 4 years ago
- New firmware for the FNIRSI-1013D osciloscope.☆144Updated 8 months ago
- A linux software to control ZTE Tech EBC A-series battery testers and electronic loads☆29Updated 2 years ago
- A intelligent Power supply with micro control and logging, for very long test (battery cycles)☆72Updated 5 years ago
- Arduino sketch, which helps detecting the connections of the I2C interface and prints info available from the SMB (SmartBatteryModule) la…☆125Updated 2 weeks ago
- A DIY soldering controller for JBC T245 handle & C245 tips☆40Updated 2 years ago
- 100 MHz Differential Probe V2☆52Updated 11 months ago
- SMBUS analyzer tool using an Arduino Pro Mini for Smart Batteries that use the Smart Battery System Specification.☆30Updated 6 years ago
- An alternative firmware for the Riden WiFi module that provides Modbus TCP and SCPI support as well as a web interface.☆28Updated last month
- Open Source 250MHz Differential Oscilloscope Probe☆76Updated 3 years ago
- Hardware and software for interfacing Chrysler's legacy CCD/PCI/SCI-bus.☆68Updated last week
- This tool provides a logging function that gets data on voltage, current and power consumption. Voltage input range is from 0 to 85V, Max…☆16Updated last year
- Arduino based hacking tool for smart batteries using SMBus.☆185Updated 4 years ago
- FT232H-based JTAG, SWD, and AVR-ISP Programmer (Supported by OpenOCD and AVRDUDE)☆36Updated last year
- ☆72Updated 3 years ago
- Firmware for the cheapest can sniffer☆38Updated last year
- An exploration into unsafely written code☆73Updated 2 years ago
- USB SMBus Interface☆159Updated 4 years ago
- Resources gathered for reverse engineering the FNIRSI 1013D and 1014D scopes☆136Updated 9 months ago
- JBC_SolderingStation☆94Updated 2 years ago
- How to use the Modbus Interface of XY6020L Digital Programmable Power Supply Module☆25Updated 11 months ago
- SmuView is a GUI for sigrok that supports power supplies, electronic loads and all sorts of measurement devices like multimeters, LCR met…☆146Updated 3 months ago
- ☆107Updated last year
- Schematics and datasheets for the Hantek DSO2000 series☆54Updated last year
- ☆36Updated 4 years ago
- With these schematics and PCB's, it's possible to create a 230V AC 4KW inverter. The main processor is based on Arduino Nano, with help f…☆62Updated 3 years ago
- Product literature of MiniDSO.☆69Updated 2 years ago
- ☆79Updated 2 years ago
- DIY Electronic load for DCDC converter characterization☆51Updated 5 years ago