Alternatives and similar repositories for python-dali

Users that are interested in python-dali are comparing it to the libraries listed below

• onitake / daliserver
  Command multiplexing server for the Tridonic DALI USB adapter
  ☆73Updated last year
• envy / esp-knx-ip
  A KNX/IP library for the ESP8266 with Arduino
  ☆145Updated 3 years ago
• franckmarini / KnxDevice
  Allow to turn your Arduino into a self-made KNX device using the hardware TPUART interface
  ☆143Updated 3 years ago
• rscada / libmbus
  Meter-bus library and utility programs
  ☆245Updated 8 months ago
• thelsing / knx
  knx stack (TP, IP and RF) for arduino and linux, Can be configured with ETS
  ☆317Updated 2 weeks ago
• thelsing / CreateKnxProd
  Simple Gui to create simple knxprod file for ETS.
  ☆60Updated 3 years ago
• dgomes / dali2mqtt
  DALI <-> MQTT bridge
  ☆50Updated last year
• ganehag / pyMeterBus
  Pure Python implementation of the Meter-Bus (M-Bus EN13757-3) protocol.
  ☆91Updated 7 months ago
• linknx / linknx
  Linknx is a service aimed at interacting with KNX devices. It features a value cache to save bus bandwidth and exposes a rules engine all…
  ☆50Updated 3 months ago
• kardia-as / zigpy-zboss
  ☆51Updated 11 months ago
• OpenKNX / Kaenx-Creator
  Create your own KnxProd Files with UI.
  ☆90Updated last month
• mbs38 / spicierModbus2mqtt
  Modbus master which publishes via MQTT
  ☆67Updated 3 months ago
• budulinek / arduino-modbus-rtu-tcp-gateway
  Arduino-based Modbus RTU to Modbus TCP/UDP gateway with web interface. Allows you to connect Modbus RTU slaves (such as sensors, energy m…
  ☆198Updated 6 months ago
• tjhowse / modbus4mqtt
  Modbus TCP <-> MQTT glue. YAML configuration. Robust.
  ☆87Updated last year
• vortex314 / serial2mqtt
  Implement a Linux gateway that reads serial port ( USB, serial , bluetooth) commands and transfers to MQTT host. MQTT without ethernet o…
  ☆140Updated last month
• ruuvi / ruuvi-sensor-protocols
  ☆47Updated 3 years ago
• gonium / gosdm630
  An interface for the Eastron SDM/Modbus smart meter series.
  ☆73Updated 6 years ago
• owagner / modbus2mqtt
  Modbus master which publishes via MQTT
  ☆129Updated last year
• shmuelzon / ble2mqtt
  A BLE to MQTT bridge
  ☆61Updated 6 years ago
• davideloba / daliMaster
  Control your lamps with a Dali shield for Arduino™
  ☆49Updated last year
• dashesy / cc-tool
  Mirror of cc-tool from SourceForge
  ☆165Updated last week
• cosino / dali2560
  The Cosino Mega 2560 DALI implementation
  ☆35Updated 9 years ago
• ruuvi / ruuvi.firmware.c
  Ruuvi Firmware version 3. Built on top of Nordic SDK 15, uses both Ruuvi and external repositories as submodules.
  ☆63Updated 4 months ago
• zigpy / bellows
  A Python 3 project to implement EZSP for EmberZNet devices
  ☆207Updated last week
• pwitab / iec62056-21
  A Python library for IEC62056-21, Local Data Readout of Energy Meters. Former IEC1107
  ☆80Updated 3 years ago
• lvzon / dsmr-p1-parser
  Ragel-based C-parser for Dutch Smart Meter P1-data (and similar IEC 62056-21 telegrams)
  ☆55Updated last year
• mistay / stknx
  demonstrates how to read bytes from stknx chip
  ☆21Updated 5 years ago
• ffcrg / ecpiww
  A wireless EnergyCam Setup with a Raspberry Pi to monitor the energy usage
  ☆34Updated 9 years ago
• flespi-software / MQTT-Tiles
  Open-source MQTT-based IoT dashboard visualization tool. Has full MQTT 5.0 support. Allows easy dashboards sharing. Works with any MQTT b…
  ☆110Updated 6 months ago
• UniPiTechnology / evok
  The API of Unipi controllers
  ☆103Updated last month