Alternatives and similar repositories for HeatpumpMonitor

Users that are interested in HeatpumpMonitor are comparing it to the libraries listed below

• gmasse / esp-modbus-mqtt
  A Modbus RTU (RS-485) to MQTT Gateway (based on ESP32)
  ☆94Updated last year
• roarfred / MBusMqttLogger
  An M-bus master that poll a meter and logs data to an MQTT server
  ☆52Updated 9 years ago
• SmartEVSE / SmartEVSE-2
  Smart Electric Vehicle Charging Station (EVSE)
  ☆98Updated 5 months ago
• Bettapro / Solar-Tracer-Blynk-V3
  Connect the EPSolar/EPEver Tracer A/B Series (RS-485 Modbus) to an ESP8266/ESP32 and monitor using Blynk /Homeassistant/MQTT... .
  ☆58Updated 3 months ago
• OpenEVSE / open_evse
  Firmware for Open EVSE
  ☆142Updated this week
• apreb / eNode
  Device to measure energy and temperature
  ☆81Updated 6 years ago
• dzurikmiroslav / esp32-evse
  ESP32 EVSE firmware
  ☆122Updated last week
• OpenSprinkler / OSBeeWiFi-Firmware
  OpenSprinkler Bee WiFi Firmware
  ☆18Updated last month
• InfernoEmbedded / PowerScraper
  A scraper for power devices to feed data to OpenEnergyMonitor
  ☆37Updated 9 months ago
• reaper7 / SDM_Energy_Meter
  reading SDM72 SDM120 SDM220 SDM230 SDM630 modbus energy meters from arduino (esp8266, esp32, avr)
  ☆259Updated last year
• OpenEVSE / openevse_esp32_firmware
  OpenEVSE V4 WiFi gateway using ESP32
  ☆214Updated this week
• OpenEVSE / ESP8266_WiFi_v2.x
  ESP8266 WiFi for OpenEVSE Version 2.x
  ☆80Updated last year
• SmartEVSE / smartevse
  Smart EVSE Electric Vehicle Charging Station
  ☆99Updated 4 years ago
• SunshadeCorp / can-service
  Simulate a BYD Battery-Box Premium HVS over CAN Bus to use a custom battery with your inverter. Controllable via MQTT.
  ☆36Updated 11 months ago
• Tom-evnut / SimpBMS
  SimpBMS Documentation
  ☆92Updated 3 years ago
• CircuitSetup / ATM90E32
  Updated version of the ATM90E32 Arduino library
  ☆31Updated 3 years ago
• gituser-rk / orno-modbus-mqtt
  Read ORNO OR-WE-514 ModbusRTU energy meter via RS485 serial and publish values to MQTT broker
  ☆29Updated 5 years ago
• jonkerj / iec62056
  Robust IEC1107/IEC62056 (DLMR/DSMR) parser in Python
  ☆16Updated 2 years ago
• OpenEVSE / OpenEVSE_PLUS
  OpenEVSE Hardware
  ☆202Updated 10 months ago
• harihanv / esp32-modbus-gateway
  esp32 port of modbus RTU to TCP Arduino gateway
  ☆71Updated 4 years ago
• tjko / sunspec-monitor
  Monitoring Sunspec (Modbus TCP) compatible Solar Inverters
  ☆39Updated 11 months ago
• Vitorbnc / espSuite
  Full-featured Serial bridge for ESP8266, supports MQTT, WebSockets,Telnet, and also comes with a nice Config Page
  ☆40Updated 2 years ago
• peninquen / Modbus-Energy-Monitor-Arduino
  A class to collect data from a energy monitor that uses modbus protocol.
  ☆47Updated 5 years ago
• leedowthwaite / SimpleLoRaGateway
  A simple, single-channel LoRa to MQTT Gateway
  ☆27Updated 6 years ago
• openenergymonitor / emonhub
  Python service linking and decoding input to MQTT & Emoncms
  ☆103Updated last month
• physee / Victron.Arduino-ESP8266
  Code to read the VE.Direct-Protocol from serial into a value array. Uses a non-blocking read loop and does checksum verification before a…
  ☆131Updated 4 years ago
• simat / BatteryMonitor
  Python code to monitor and log battery data
  ☆108Updated 2 years ago
• tjhowse / modbus4mqtt
  Modbus TCP <-> MQTT glue. YAML configuration. Robust.
  ☆92Updated last month
• openenergymonitor / emontx3
  EmonTx V3.4.x Hardware and older discreet firmware, see EmonTxV3CM repo for latest
  ☆66Updated 3 months ago
• envy / esp-knx-ip
  A KNX/IP library for the ESP8266 with Arduino
  ☆148Updated 4 years ago