Eriond / clockport_pi_interfaceLinks
Amiga clock port to Raspberry Pi interface (alternate PCB layout)
☆16Updated last year
Alternatives and similar repositories for clockport_pi_interface
Users that are interested in clockport_pi_interface are comparing it to the libraries listed below
Sorting:
- PCMCIA SRAM card project (Sakura) - rev 2.1.2019☆11Updated 5 years ago
- A knockoff of the A1050 front mounted RAM Expansion for the Amiga 1000☆12Updated last year
- Mechanical keyboard for the Amiga 2000/3000/4000.☆24Updated 2 years ago
- KiCad library files for Commodore Amiga related projects☆24Updated 4 years ago
- An Open source IDE driver for Amiga computers☆32Updated last week
- ☆25Updated 4 months ago
- Here is a Picasso 4MB Flicker Fixed for Amiga 2000, 3000 and 4000☆14Updated last year
- ☆27Updated 2 years ago
- Fancy Kickstart Switcher for A500-A600-A1200-A4000☆18Updated 7 months ago
- ☆11Updated 3 years ago
- Amiga 500 8MB FastRAM and IDE interface☆33Updated 9 months ago
- Adapter to fit the older 1MB Agnus to the A500+☆18Updated 3 years ago
- A314 board for the A1000's front memory expansion bay☆14Updated last year
- A replica of the Prelude ZII sound card for the Amiga.☆34Updated last year
- A LAN/IDE solluntion with Clockport for the Amiga ZorroII/III Slot☆16Updated 5 years ago
- Adapter to allow the use of the A500+/A600 Agnus (390544 8375 ) in an Amiga A3000☆17Updated 2 years ago
- Amiga 500 PC AT 286 emulator board☆35Updated last year
- single 12V Power supply module for Amiga 500 computers☆29Updated 3 years ago
- A simple interface for standard PC Floppy Disk Drive and Amiga Computers☆28Updated 3 years ago
- ☆13Updated 2 years ago
- ReAmiga 3000TH by John 'Chucky' Hertell converted to KiCAD☆20Updated 4 years ago
- MOS 6520 PIA / MOS 6522 VIA / MOS 6526/8520/8521 CIA replacement☆37Updated last month
- Schemtics and PCB Layout for the Amiga 2000 Rev6☆11Updated 3 years ago
- The Ultimate Amiga RGB to VGA filtered buffered let-those.ugly-barrels-away adapter☆28Updated last month
- Simple SPI controller for Amiga 500 with support for SD-cards and Ethernet controller☆13Updated 2 years ago
- 65(c)02 to 7501/8501 converter☆18Updated 3 years ago
- Replace the old 44256 DRAM chips on your A500 with newer SRAM memory☆3Updated 5 years ago
- A PLCC-84 plug adapter created out of PCBs☆26Updated 8 months ago
- Amiga IDE Boot Rom☆21Updated 7 years ago
- This is a PCB based on the Steve White schematic. You just plug on the top of a RPI 3 and you have a fully working 1541 disk emulator :)☆18Updated 5 years ago