istedman / Floppy_adaptor
Converts PC floppy drive interface to Amiga/Shugart bus interface. Now also supports the Atari ST/TT.
☆49Updated 3 years ago
Alternatives and similar repositories for Floppy_adaptor:
Users that are interested in Floppy_adaptor are comparing it to the libraries listed below
- Adapter that allows external connection of floppy disk or Gotek drives☆41Updated 2 years ago
- Amiga 600 Accelerator And RAM Expansion☆28Updated 3 years ago
- Mechanical keyboard for Amiga 500 and 1200, using Cherry MX compatible switches.☆47Updated last year
- Use USB input devices on Amiga computers, using the excellent Raspberry Pi Pico as a USB-to-bitbang adapter.☆52Updated 7 months ago
- SRAM substitute for C64C shortboards☆58Updated 7 years ago
- Inexpensive A500 hard disk interface☆27Updated last year
- Commodore 64 PLA replacement☆44Updated 3 years ago
- Replace the old 44256 DRAM chips on your A500 with newer SRAM memory☆3Updated 5 years ago
- A simple interface for standard PC Floppy Disk Drive and Amiga Computers☆27Updated 2 years ago
- SPI adapter that connects to the parallel port of an Amiga☆47Updated 2 weeks ago
- single 12V Power supply module for Amiga 500 computers☆29Updated 3 years ago
- MOS 6520 PIA / MOS 6522 VIA / MOS 6526/8520/8521 CIA replacement☆28Updated this week
- A Gotek based compact PCB for Amiga☆43Updated 10 months ago
- Open Hardware RTC module for the Amiga 1200.☆24Updated 5 years ago
- STM32 Usb Based firmware microcontroller for any Amiga internal keyboard adapter☆37Updated last year
- An SMD verson of the great Amiga 500☆67Updated 10 months ago
- ☆26Updated 2 years ago
- 8MB FastRAM and BSC-AT-Bus IDE controller for Amiga 500☆25Updated 7 months ago
- Amiga 500 8MB FastRAM and IDE interface☆32Updated 7 months ago
- CPLD Replacement for A2000 Buster☆68Updated last year
- Efficient Commodore 64 power supply with overvoltage + overcurrent protection☆43Updated 6 years ago
- Improved design attempt for Amiga 500 in socket 68000 Accelerator, FastRAM and IDE Interface☆53Updated 7 months ago
- Adapter to fit the older 1MB Agnus to the A500+☆16Updated 3 years ago
- 68000 Relocator with FLASH Kickstart☆31Updated 2 years ago
- A case for the Versa64Cart☆26Updated 5 years ago
- ReAmiga 3000TH by John 'Chucky' Hertell converted to KiCAD☆19Updated 4 years ago
- A Super Expander Cartridge with the option for EPROMs (instead of the original ROMs)☆22Updated 2 years ago
- A remake of the RA5-512K expansion memory for the Amiga 500 made in diptrace☆17Updated 5 years ago
- This is an Enhanced version of the 1581 Drive PCB.☆43Updated last year
- An easier to solder version of the Lumafix board, components spaced out a bit more to make things easier on the beginner (mostly meaning …☆35Updated 5 years ago