rainisto / Minimal_A501Links
Amiga 512kB memory expansion. Minimal cost efficient design.
☆14Updated 5 years ago
Alternatives and similar repositories for Minimal_A501
Users that are interested in Minimal_A501 are comparing it to the libraries listed below
Sorting:
- A PSU for the Commodore C64 and up to two 1541-II floppy disk drives☆24Updated 2 years ago
- Public KiCad Libraries from www.hackup.net☆12Updated 2 years ago
- ☆15Updated 4 years ago
- This is a Kernal Adapter/Switch for the Commodore C64 long board☆17Updated 3 years ago
- 90 degree adapter for mounting a C64 cartridge vertically☆11Updated 11 months ago
- RGBtoHDMI CPLD-adapter-board for A500.☆12Updated 2 years ago
- A small MicroSD interface for the Amiga Parallel port☆11Updated 11 months ago
- An Adaptor for the Character ROM of the Commodore C64☆19Updated 3 years ago
- This is a PCB based on the Steve White schematic. You just plug on the top of a RPI 3 and you have a fully working 1541 disk emulator :)☆18Updated 5 years ago
- The reverse engineered schematics for the Action Replay II/III for the Amiga. The eventual end goal of this project is to reimplement the…☆13Updated 2 years ago
- ☆13Updated 3 years ago
- Control Amiga add-on boards through mouse buttons☆26Updated 5 years ago
- Allows use of regular EPROMS on Amiga 500 Rev 5 boards☆18Updated 5 years ago
- A simple interface for standard PC Floppy Disk Drive and Amiga Computers☆30Updated 3 years ago
- A Gotek based compact PCB for Amiga☆51Updated last year
- Greaseweazle Projects☆16Updated 2 years ago
- A case for the Versa64Cart☆27Updated 6 years ago
- Fancy Kickstart Switcher for A500-A600-A1200-A4000☆21Updated 3 months ago
- Amiga 500+ v8a Re-Imagined.☆11Updated 6 years ago
- 8MB FastRAM and BSC-AT-Bus IDE controller for Amiga 500☆38Updated 6 months ago
- An external adapter to connect all kind of floppy drives to Amiga☆12Updated 2 years ago
- ☆12Updated 4 years ago
- Various S-Video devices☆23Updated 2 years ago
- Amiga 500 8MB FastRAM and IDE interface☆36Updated last year
- ☆15Updated 7 years ago
- Simple SPI controller for Amiga 500 with support for SD-cards and Ethernet controller☆13Updated 3 years ago
- Replace 82s126/82s129/82s131 PROMs with (E)EPROMs☆14Updated last year
- MOS8701 replacement module with a jumper to select NTSC or PAL having a dual-clock.☆11Updated 5 years ago
- Schemtics and PCB Layout for the Amiga 2000 Rev6☆14Updated 4 years ago
- Open Hardware RTC module for the Amiga 1200.☆26Updated 6 years ago