Alternatives and similar repositories for LFS

Users that are interested in LFS are comparing it to the libraries listed below

• fubarlabs / foocars
  Low Cost Racing Autonomous Vehicles: RC Cars to Power Wheels Racers
  ☆15Updated last year
• mjbots / power_dist
  ☆13Updated 5 months ago
• maximkulkin / lewansoul-lx16a
  Library and UI to configure and control LewanSoul LX-16A servos
  ☆65Updated 2 years ago
• alvaroferran / IntelliServo
  Project aiming to transform regular hobby servos into smart ones by replacing their original boards.
  ☆22Updated 9 years ago
• T-Kuhn / DeltaRobInverseKin
  This library provides a way to evaluate, given some x, y, z coordinates, the needed motor positions of a Delta Robot.
  ☆18Updated 7 years ago
• Toglefritz / Capers_II
  Capers II is a hexapod robot with three degrees of freedom per leg.
  ☆54Updated 7 years ago
• dabmake / ESPROS
  ROS for ESP8266/ESP32
  ☆44Updated 6 years ago
• gouldpa / ESP-32-Brushless
  ☆27Updated 3 years ago
• Interbotix / arbotix
  Drivers and hardware definitions for the arbotix
  ☆15Updated 5 years ago
• hoverboard-robotics / hoverboard-firmware-hack-FOC
  With Field Oriented Control (FOC)
  ☆50Updated 2 years ago
• baldengineer / Raspberry-Pi-Soft-Power-Controller
  Originally intended to be a controller for a RetroPie. A soft power controller that allows for Raspberry Pi proper shutdown. Intention is…
  ☆22Updated 8 years ago
• gouldpa / FOC-Arduino-Brushless
  Currently running saddle sinusoidal control. FOC requires 3 phase current feedback and the CLARKE & PARK transforms.
  ☆41Updated 4 years ago
• farrellf / Balancing_Robot_Firmware
  ☆50Updated 8 years ago
• hadabot / hadabot_main
  Content used in collaboration with various Hadabot blog posts to get guide you through learning ROS2.
  ☆39Updated 2 years ago
• KoshiroRobot / Simple-Smart-Servo-Driver
  ☆40Updated 7 months ago
• timoxd7 / FastRCReader
  A fast and lightweight library to read PWM RC signals from a RC RX (Receiver)
  ☆29Updated 2 years ago
• PCrnjak / 3D-printed-Hexapod
  Code and STL files for small 18 servo hexapod.
  ☆30Updated last year
• DizzyRobot / DirectServo
  Controller that drives BLDC motor as servo
  ☆74Updated 5 years ago
• Roboteurs / rbx1-software
  Software to drive a 3D printed robot with a SlushEngine or other motor controller driver
  ☆28Updated 8 years ago
• tve / lx16a-servo
  Simple ESP32-Arduino library to operate LX-16A serial servos
  ☆24Updated last year
• rppelayo / arduino-self-balancing-robot
  ☆73Updated last year
• elchals / Manolo-self-balancig-robot-by-ElChals
  A self balancing robot code with steppers and IMU mpu6050
  ☆11Updated 9 years ago
• XRobots / SonicRobot
  ☆29Updated 3 years ago
• XRobots / miniDogV2
  miniDog V2 CAD and Code
  ☆63Updated 5 years ago
• roaldlemmens / morph
  MORPH : Modular Open Robotics Platform for Hackers
  ☆45Updated 6 years ago
• Toglefritz / Bertram_Robot_Arm
  This repository contains the bill of materials, design files, and firmware for building a giant 3D printed robot arm.
  ☆69Updated 6 years ago
• qwertpas / O32controller
  Miniature closed-loop controller for brushless DC motors
  ☆29Updated 10 months ago
• elkayem / ZippyTheBalancingRobot
  A 3D printed balancing robot
  ☆73Updated 8 years ago
• XRobots / ROSremote
  ☆34Updated 3 years ago
• mjbots / pi3hat
  ☆42Updated 4 months ago