Alternatives and similar repositories for kicad-m2ngff:

Users that are interested in kicad-m2ngff are comparing it to the libraries listed below

• jmgao / kicad-ngff
  NGFF (M.2) edge connector footprints and symbols for KiCAD
  ☆37Updated 4 years ago
• mithro / kicad-mini-pci-express
  KiCad library and templates for creating designs with Mini-PCI-express cards (both the cards and sockets).
  ☆99Updated 6 years ago
• probe-scope / Probe-Scope-PCB
  Main Probe Scope PCB Repo
  ☆56Updated 5 years ago
• tdjastrzebski / ICN6211-Configurator
  ICN6211 Configurator
  ☆38Updated 4 years ago
• amaranth-farm / ch569-hspi-fpga
  Gateware to communicate with the high speed parallel interface (HSPI) of the CH569 with a FPGA
  ☆31Updated 2 years ago
• gregdavill / KiZip
  KiCad Plugin to package gerbers ready for ordering
  ☆36Updated 2 years ago
• prosper00 / CH32V305-DAPLink-HS
  CH32V305 DAPLink - USB2.0 High Speed DAPLink firmware for the WCH-LinkE
  ☆17Updated 8 months ago
• mwelling / rp2040-pmod
  RP2040 MCU based PMOD
  ☆20Updated 4 months ago
• timonsku / M.2-Card-Footprints
  Footprints and template for making your own M.2 devices
  ☆102Updated 2 years ago
• Jana-Marie / USB-PD-Firmware
  USB-PD firmware for the stm32f072 - forked from https://git.clayhobbs.com/pd-buddy/pd-buddy-firmware
  ☆30Updated 5 years ago
• Memotech-Bill / Teensy_Blaster
  Altera "USB_Blaster" clone using Teensy 3.5 microcontroller
  ☆19Updated 4 years ago
• kingyoPiyo / RasPico_SHIBAKI_Board
  SFP module test board for Raspberry Pi Pico
  ☆56Updated 8 months ago
• devbisme / WireIt
  KiCad PCBNEW plugin that lets you add wires between pads on a PCB, delete them, and swap wires between pads.
  ☆85Updated last month
• tinfever / KiCAD-Custom-DRC-Rules-for-JLCPCB-with-Unit-Tests
  Comprehensive KiCAD Custom Rules for JLCPCB 4-layer service. Including PASS/FAIL test PCB examples for each rule.
  ☆26Updated last year
• random-builder / kicad_freerouting-plugin
  KiCad FreeRouting.jar round trip invoker
  ☆56Updated 3 years ago
• voltlog / emmc-wfbga153-microsd
  eMMC WFBGA153 to microSD card adapter PCB
  ☆59Updated 10 months ago
• robots / wch-ch32v20x-flash
  ☆12Updated last year
• farpatch / farpatch
  Farpatch debugger software layer, backed by Black Magic
  ☆49Updated last month
• cellularmitosis / hp-03458-66509-clone
  A clone of the LTZ1000 reference board from the HP 3458A 8.5-digit multimeter
  ☆12Updated 7 years ago
• hydrausb3 / hydrausb3_hw
  HydraUSB3 V1 is an open source developer kit for the WCH CH569 MCU to experiment with streaming / high-speed protocols(USB2 HS, USB3 SS, …
  ☆32Updated last year
• hansfbaier / ch569-usb3-board
  USB3 super speed development board useful as FPGA expansion based on WCH-Tech CH569
  ☆26Updated 2 years ago
• bvernoux / EMC_5uH_LISN
  Open Source Hardware Dual 5µH LISN(Line Impedance Stabilization Network)
  ☆22Updated last year
• esden / pretty-kicad-libs
  Esden style kicad libraries.
  ☆63Updated 3 months ago
• debug-edge / DebugEdge
  A small bridge to link a SWD programmer to an AVX Open Ended Card Edge connector.
  ☆42Updated 4 years ago
• Galvant / gpibusb-pcb
  PCB KiCAD project files
  ☆77Updated 10 years ago
• zeldin / fx3lafw
  Blob-free logic analyzer firmware for FX3
  ☆79Updated last year
• HonghongLu / CH554
  8051 microcontroller
  ☆40Updated 7 years ago
• mick909 / stm32-dap
  ARM CMSIS/DAP implementation for STM32
  ☆40Updated 7 years ago
• openwch / ch569
  SDK sch&layout reference design and datasheet documention
  ☆60Updated last year
• Jana-Marie / CH330_Hardware
  CH330 breakout board
  ☆26Updated 2 years ago