Alternatives and similar repositories for PPS-Client

Users that are interested in PPS-Client are comparing it to the libraries listed below

• twteamware / raspberrypi-ptp
  How to run IEEE-1588 on RaspberryPi hardware
  ☆85Updated 7 years ago
• jclark / rpi-cm4-ptp-guide
  Guide to using the hardware PTP support in the Raspberry Pi CM4 and CM5
  ☆159Updated 8 months ago
• rascol / Raspberry-Pi-PPS-Client
  Microsecond PPS time synchronization client for Raspberry Pi.
  ☆35Updated 5 years ago
• sparkfun / SparkFun_RTK_Firmware
  Centimeter precision GPS/GNSS using L1/L2 signals broadcast over Bluetooth SPP (using the ESP32) in an easy to use enclosure.
  ☆102Updated 2 months ago
• linuxonly1993 / gpsd_pps
  NTP time with GPSD and PPS-enabled GPS device
  ☆37Updated 6 years ago
• sparkfun / SparkFun_RTK_Everywhere_Firmware
  Centimeter precision GPS/GNSS using L1/L2/L5 signals broadcast over Bluetooth, WiFi, and Ethernet.
  ☆48Updated this week
• InnoRoute / RealtimeHAT
  Documentation and source for InnoRoutes Raspberry TSN addon HAT
  ☆50Updated last year
• septentrio-gnss / uBloxCorrectionsWithSeptentrio
  ☆13Updated last year
• mayeranalytics / pyUBX
  Python library for parsing/generating u-blox UBX protocol messages, and for creating parsers/generators in other languages.
  ☆90Updated 5 years ago
• mazgch / hpg
  This project demonstrates a full RTK solution with built in correction services.
  ☆107Updated 3 weeks ago
• Korving-F / ublox
  Python library for the UBX protocol
  ☆37Updated 5 years ago
• dalymople / ubxtranslator
  A simple python parser for UBX messages
  ☆26Updated last week
• semuconsulting / pynmeagps
  Python library for parsing and generating NMEA 0183 GNSS/GPS protocol messages.
  ☆104Updated last week
• philcrump / stm32-ntp-server
  Firmware for Stratum 1 NTP Server using uBlox M8 GNSS Receiver and STM32F429ZI Nucleo Development Board
  ☆32Updated 5 years ago
• introlab / OpenIMU-MiniLogger
  OpenIMU - Open Hardware Mini Logger based on ESP32
  ☆43Updated 3 years ago
• tridge / pyUblox
  python Ublox module
  ☆105Updated 2 years ago
• newracom / nrc7292_sw_pkg
  NRC7292 Software Package for Host mode (Linux OS)
  ☆64Updated last year
• sparkfun / SparkFun_LoRaSerial
  A simple to use radio modem for long distances using LoRa.
  ☆20Updated last year
• szigix / YATPGPSDO
  Yet Another TruePosition GPSDO
  ☆15Updated 3 years ago
• philrandal / gpsctl
  GPS control and configuration for U-Blox GPS on Raspberry Pi 3B...
  ☆55Updated last month
• amungo / ItsFx3
  Software for Amungo's nut4nt board RF front-end IC with NTLab NT1065 four-channel multiband navigation
  ☆30Updated 3 years ago
• DavidArmstrong / SCL3300
  Arduino library for interfacing with the Murata SCL3300 Inclinometer via SPI
  ☆24Updated 3 years ago
• commschamp / cc.ublox.commsdsl
  CommsDSL schema-based definition of UBLOX protocol
  ☆43Updated last month
• u-blox / ublox-C099_F9P-uCS
  ☆62Updated 5 years ago
• sparkfun / OpenLog_Artemis
  The OpenLog Artemis is an open source datalogger the comes preprogrammed to automatically log IMU, GPS, serial data, and various pressure…
  ☆100Updated last month
• meh301 / PocketSDRNEO
  Release of PocketSDR NEO* edition schematics, PCB, and BOM in KICAD 7.0 format.
  ☆13Updated last year
• hcwinsemius / RTK_GNSS
  Manual for RTK GNSS with low cost u-blox ZED-F9P receivers rover-base setup
  ☆61Updated last year
• gnss-sdr / gr-dbfcttc
  A GNU Radio module of a digital beamformer prototype for GNSS receivers
  ☆19Updated 9 years ago
• taroz / mosaicHAT-Station
  mosaicHAT+ GNSS antenna + Raspberry Pi + Touch display + Battery + Case
  ☆32Updated 4 years ago
• semuconsulting / pygnssutils
  Python GNSS CLI utility library for reading, parsing and broadcasting NMEA, UBX, SBF, QGC, RTCM3, NTRIP and SPARTN protocols
  ☆133Updated last month