Alternatives and similar repositories for opens-ecu

Users that are interested in opens-ecu are comparing it to the libraries listed below

• rlinewiz / OpenMoose
  Read and write your Volvo ECU (Bosch ME7) using a DiCE cable. Early working version assembled from various abandoned projects. Its old an…
  ☆21Updated 2 years ago
• joseshiru / PyroNode
  open-source ESP32-based control system designed to manage multiple outputs, monitor temperature, and provide robust control over external…
  ☆17Updated last year
• themelisx / ESP32CarODB
  Car OBD gauges Arduino TFT
  ☆23Updated last year
• muki01 / I-K_Bus
  BMW I-Bus / K-Bus communication and control with microcontrollers (ESP32, Arduino, etc.).
  ☆38Updated 2 months ago
• micahpearlman / zero-o2-simulator
  An 02/lambda eliminator/simulator to tune an engine ECU in closed loop mode.
  ☆17Updated 10 years ago
• autosportlabs / ESP32-CAN-X2
  Hello world sample code for the ESP32-S3 dual CAN bus development board
  ☆24Updated 3 months ago
• oelprinz-org / BL49SP
  Wideband Lambda Controller with Bosch CJ125
  ☆42Updated last year
• rvmiller89 / arduino_obd
  Arduino OBD-II Interface
  ☆21Updated 3 years ago
• corygrant / CANBoard_HW
  Hardware - CAN enabled small input / output expansion board. Switch panels, steering wheel buttons/knobs, etc.
  ☆44Updated 3 months ago
• AasaiAlangaram / Python-LIN-Diagnostic-Tool
  One can use this project to build their own LIN Analyzer.
  ☆19Updated last year
• MagnusThome / ESP32_OBD2_Emulator
  Replies to all OBD2 requests with dummy data
  ☆14Updated last year
• ElDominio / ETC_Control
  Arduino Nano based ETC controller implemented with working states
  ☆10Updated 7 years ago
• skpang / Arduino_CAN-Bus_ECU_reader
  ☆50Updated 8 years ago
• fanyi3315 / bosch-med17-block-reader
  Decode blocks out of a Bosch MED17 ECU internal flash / EEPROM dump
  ☆20Updated 6 years ago
• damienmaguire / 8HP-TCU
  OpenSource controller for the ZF 8HP series of automatic gearboxes
  ☆11Updated 10 months ago
• bill57p9 / BMW_ZGW_emulator
  BMW CANbus gateway emulator & proxy
  ☆21Updated 4 years ago
• andreika-git / hellen-one
  Hellen-One Hardware Platform for rusEFI Engine Management System
  ☆24Updated 2 weeks ago
• ElDominio / CANforVAGME75
  CANBUS implementation for ME7.5 with Arduino Nano and MCP2515
  ☆20Updated 6 years ago
• dallashudson / tunecomparison
  For comparing different tunes differences from WinOLS!
  ☆11Updated 4 years ago
• notchum / OBD_Gauge
  An Arduino-powered automotive gauge using OBDII.
  ☆11Updated 4 years ago
• handmade0octopus / ds2
  DS2 K-line library for Arduino and ESP32
  ☆52Updated 7 months ago
• rnd-ash / mb-w211-pc
  A fully custom infotainment system for my W211 E55 AMG based on a PC with a custom daughter board!
  ☆32Updated 3 months ago
• muki01 / OBD2_K-line_Reader
  OBD2 K-line Reader (ISO9141 and ISO14230) with microcontrollers like ESP32, Arduino
  ☆135Updated last month
• ParkingVehicle / DiagnosticTool
  computer software application to flash bootloader and read ECUs status
  ☆11Updated 7 years ago
• dvjcodec / ECU_Teen_3.5_rev.B
  ECU designed for Speeduino firmware
  ☆12Updated 7 years ago
• dvjcodec / ECUTeen_3.5
  ECU designed for Speeduino firmware
  ☆34Updated 5 years ago
• AmesisProject / AP_ME7.xxTunerMap
  Sofrware to tuning ME7.xx Family
  ☆13Updated 3 years ago
• djandruczyk / MegaTunix
  MegaTunix Tuning software for MegaSquirt (and others) EFI Controllers
  ☆55Updated 7 years ago
• kmalinich / dieslg8
  Arduino Uno + Seeed Studio CANBUS + BMW M57 diesel
  ☆46Updated 4 years ago
• MOTTechnologies / ecutools-1
  Open Source ECU Tuning and Diagnostics
  ☆17Updated 11 years ago