Alternatives and similar repositories for Arduino_STM32

Users that are interested in Arduino_STM32 are comparing it to the libraries listed below

• MrAzE / arduino_canbus
  Examples of Arduino code used to communicate with canbus.
  ☆10Updated 8 years ago
• mintynet / esp32-slcan
  ESP32 slcan compatible device
  ☆101Updated 4 years ago
• akpc806a / CAN_Logger
  CAN Bus logger with SD card implemented using ChibiOS
  ☆71Updated 6 years ago
• Longan-Labs / Arduino_CAN_BUS_MCP2515
  Arduino CAN Bus library, MCP2515/MCP2551
  ☆148Updated last year
• autowp / CANreader
  Android CAN client
  ☆63Updated 8 years ago
• atc1441 / arduino-mcp2515
  Arduino MCP2515 CAN interface library
  ☆40Updated 5 years ago
• skpang / Teensy_CAN-Bus_ECU_reader
  ☆39Updated 8 years ago
• autowp / can-usb
  Arduino sketch for CAN-BUS adapter
  ☆108Updated 9 years ago
• macchina / LIN
  Arduino library to add dual LIN support on SAM3X based boards with a TJA1021/TJA1027 transceiver
  ☆116Updated 6 years ago
• smartgauges / obd2-bt-stm32
  Firmware for the cheapest can sniffer
  ☆38Updated last year
• kahiroka / slcanuino
  USB-CAN(SocketCAN) sketch for Arduino CAN-BUS shield
  ☆138Updated 3 years ago
• akpc806a / CAN_Bridge
  CAN Bus Bridge / Smart Repeater
  ☆37Updated 6 months ago
• connorwm / J1850VPW
  Arduino Code (eventually library) for communicating with J1850 VPW OBD-II equipped cars.
  ☆21Updated 10 years ago
• zapta / linbus
  An Arduino based LINBUS stack and signal interceptor/injector.
  ☆195Updated 6 years ago
• collin80 / can_common
  Common structures and functionality for CAN libraries
  ☆139Updated last year
• latonita / arduino-canbus-monitor
  Can bus monitoring tool based on arduino and can bus shield. Implements CAN ASCII/SLCAN protocol compatible with Lawicel CAN232/CANUSB. C…
  ☆325Updated last year
• AppSaloon / ecu-can-bus-simulator
  This is a small example sketch that simulates a cars ecu
  ☆80Updated 4 years ago
• jsphuebner / inverter-hardware
  Eagle schematics of inverter main board, sensor boards and gate drivers
  ☆71Updated 3 years ago
• seishuku / teensycanbusdisplay
  Jetta TDI aux display
  ☆18Updated 5 years ago
• McNeight / CAN_Library
  Multiplatform Arduino library for supporting the native CAN controller on Due (SAM3X) and Teensy 3.1 (K2X) as well as MCP2515 through SPI
  ☆95Updated 7 years ago
• collin80 / due_can
  Object oriented canbus library for Arduino Due compatible boards
  ☆260Updated 3 years ago
• nopnop2002 / esp-idf-CANBus-Monitor
  Monitor Canbus traffic
  ☆130Updated 4 months ago
• alexandreblin / arduino-can-reader
  An Arduino sketch to read data from a CAN bus
  ☆96Updated 6 years ago
• SeeedDocument / USB-CAN-Analyzer
  ☆117Updated last year
• marcinbor85 / can-prog
  Command-line tool to flashing devices by CAN-BUS
  ☆86Updated 5 years ago
• CANBus-Triple / CANBus-Triple-Hardware
  Eagle CAD files for CANBus Triple Hardware
  ☆56Updated 8 years ago
• abhishekoct18 / allpro
  Open-source ELM327 OBD adapter
  ☆38Updated 9 years ago
• togglebit / ArduinoDUE_OBD_FreeRunningCAN
  These classes have been built with free-running CAN and OBDII data acq in mind
  ☆50Updated 3 years ago
• rusefi / hw_microRusEfi
  microRusEfi board for rusEfi ECU
  ☆81Updated 3 weeks ago
• nopnop2002 / Arduino-CANBus-Monitor
  mcp2515 canbus module to Monitor Canbus traffic
  ☆41Updated last year