Alternatives and similar repositories for usbnet

Users that are interested in usbnet are comparing it to the libraries listed below

• elehobica / pico_spdif_recorder
  S/PDIF recorder to WAV on microSD card for Raspberry Pi Pico series
  ☆14Updated last week
• atanisoft / esp32usb
  ESP32-S2/S3 TinyUSB wrapper (alternative for the ESP-IDF tinyusb component). It is highly recommended to use the ESP-IDF tinyusb componen…
  ☆36Updated 2 years ago
• dquadros / RPTerm
  Serial Terminal Firmware for RP2040 Boards
  ☆20Updated 8 months ago
• holysnippet / pico_eth
  RP2040 Minimal hardware (PIO) Ethernet interface + LwIP TCP/IP stack driver
  ☆34Updated last year
• ArcaneNibble / wch-uf2
  CH32V UF2 bootloader
  ☆47Updated 10 months ago
• voltlog / emmc-wfbga153-microsd
  eMMC WFBGA153 to microSD card adapter PCB
  ☆60Updated last year
• jjsch-dev / pico_i2c_sniffer
  i2c sniffer with a Raspberry Pi Pico
  ☆84Updated 3 years ago
• PontusO / arduino-pico-rp2350
  A RP2350 variant of the RP2040 Arduino Pico BSP
  ☆19Updated 10 months ago
• FRautenberg / Logic-Analyzer
  simple and cheap 16 channel logic analyzer based on Cypress CY7C68013A development board
  ☆33Updated 4 years ago
• sidd-kishan / PicoPiFi
  A driverless usb rndis wifi dongle based on $6 and easily available pi pico w. To support wifi on experimental platforms like windows on …
  ☆50Updated last month
• 8086net / pico-sexa-uart-bridge
  Raspberry Pi Pico UART-USB-I2C bridge (USB to six UARTs and one I2C)
  ☆56Updated 3 months ago
• chuanjinpang / windows_win10_idd_xfz1986_usb_display_drv_f1c200s
  win10 idd driver for usb display. support f1c200s, esp32s2
  ☆57Updated 11 months ago
• Jana-Marie / CH330_Hardware
  CH330 breakout board
  ☆26Updated 2 years ago
• wagiminator / CH32X035-USB-PD-Adapter
  Portable Programmable Power Supply
  ☆54Updated 5 months ago
• atc1441 / CH55xOneClickCompiler
  CH551 to CH554 One Click SDCC Compiler
  ☆23Updated 3 years ago
• openwch / ch570
  CH570 is the world’s cheapest RISC-V 2.4GHz wireless & USB2 SoC, costing just about a dime (10 cents)!
  ☆50Updated last month
• OLIMEX / ESP32-S3-DevKit-LiPo
  ESP32-S3 development board with JTAG/USB-OTG and LiPo charger
  ☆24Updated 10 months ago
• notro / gud-pico
  Raspberry Pi Pico GUD USB Display
  ☆30Updated 7 months ago
• ConfedSolutions / pico-py-serial-flash
  Repository that contains a serial flasher application using Python.
  ☆15Updated 2 years ago
• adafruit / Adafruit-QT-Py-RP2040-PCB
  PCB files for Adafruit QT Py RP2040.
  ☆18Updated 3 years ago
• adafruit / u2if
  USB to interfaces implementing MicroPython "machine" module functionalities on a computer.
  ☆28Updated 4 months ago
• adafruit / M.2
  Discussion, files, spec, and more for a M.2 standard for makers
  ☆34Updated 4 years ago
• atc1441 / chflasher
  ☆29Updated 4 years ago
• jpbarraca / LogicAlNucleo
  A SUMP compatible Logical Analyser for the STM32F4
  ☆26Updated 9 years ago
• lonehog / JTAGprobe
  Firmware for Raspberry Pico to work as JTAG debugger using OpenOCD
  ☆49Updated 3 months ago
• wagiminator / CH552-USB-OLED
  USB controlled I²C OLED
  ☆67Updated last year
• stanleyondrus / reTerminalEM
  reTerminalEM is an open-source expansion module platform for reTerminal's high speed interface (PCIe X2, USB 2.0, POE, 2x I2C, 2x SPI, UA…
  ☆22Updated 2 years ago
• CRImier / AltmodeFriend
  Altmode Friend code, STEP and other files
  ☆30Updated 9 months ago
• vd-rd / sbc_allwinner_a13
  Open hardware compute module with Allwinner A13 (ARM-A8 @1GHz), DDR3 (max 512MB) and expansions (USB, GPIO, WiFi, LCD, Audio)
  ☆24Updated 5 months ago
• wagiminator / ATtiny412-VoiceChanger
  Change the Pitch of your Voice
  ☆20Updated 2 years ago