Alternatives and similar repositories for Calipatron:

Users that are interested in Calipatron are comparing it to the libraries listed below

• diminDDL / PiUPS
  A UPS for raspberry pis.
  ☆10Updated last year
• 30350n / free2ki
  FreeCAD to KiCad 3D model exporter
  ☆43Updated last week
• Peter-van-Tol / LITEXCNC-HUB75HAT
  A PCB that turns the Colorlight 5A-75B into an easy to use LinuxCNC motion controller
  ☆11Updated last year
• kingoflolz / linear-actuator-hardware
  ☆60Updated 2 years ago
• NNNILabs / Manhattan-Adapters-Prototyping-Ideas
  SMD adapters for Manhattan-style prototyping.
  ☆31Updated last year
• Peter-van-Tol / LiteX-CNC
  Generic CNC firmware and driver for FPGA cards which are supported by LiteX
  ☆61Updated 2 weeks ago
• makerstorage / pnpAssist
  PNPASSIST: A “SMART” BUILD PLATFORM FOR MANUAL PCB ASSEMBLY
  ☆42Updated 3 years ago
• wagiminator / ADuM3160-USB-Isolator
  2.5kV USB 2.0 Isolator with 200mA Power Supply and Full Speed (12Mbps) Support
  ☆58Updated 2 years ago
• photonfirmware / photon
  Open-Source firmware for pick and place feeders
  ☆49Updated 2 weeks ago
• multigcs / LinuxCNC-RIO
  RealtimeIO for LinuxCNC based on an FPGA
  ☆74Updated 6 months ago
• wasspaul / sig_gen
  A simple cost-effective demo, test, training, board for an oscilloscope made from a Raspberry Pi Pico
  ☆57Updated 2 months ago
• cooked / kimotor
  KiCad plugin for the design of parametric PCB motors
  ☆65Updated 8 months ago
• will127534 / PCIe3_Hub
  A opensource PCIe 3.0 Hub design based on ASM2806 with Raspberry Pi 5's PCIe FPC connector design
  ☆47Updated 3 months ago
• wntrblm / jellyfish-and-starfish
  ☆103Updated 2 years ago
• BirdbrainEngineer / microscope-upgrade
  Microscope upgrade with xyz stage and 2K camera stream
  ☆12Updated last year
• sensille / litehm2
  LinuxCNC FPGA board port to LiteX
  ☆26Updated last month
• Steffen-W / KiCad-Parasitics
  KiCad plugin to determine the parasitic properties of the printed tracks in the PCB layout.
  ☆32Updated this week
• TomKeddie / prj-kicad-jlcpcb
  ☆36Updated 2 years ago
• tinfever / KiCAD-Custom-DRC-Rules-for-JLCPCB-with-Unit-Tests
  Comprehensive KiCAD Custom Rules for JLCPCB 4-layer service. Including PASS/FAIL test PCB examples for each rule.
  ☆26Updated last year
• esden / KiBus
  KiCad bus length matching script.
  ☆30Updated 8 months ago
• limpkin / xt60_parallelizer
  a custom board to monitor custom battery packs
  ☆16Updated 9 months ago
• hstarmans / hexastorm
  Amaranth HDL framework for laser scanner with motion control
  ☆27Updated this week
• marcoreps / linuxcnc_leadshine_EL8
  LinuxCNC configuration with EtherCAT Servo Drives Leadshine EL8 and some Beckhoff IO Modules
  ☆28Updated 4 months ago
• kingoflolz / linear-actuator-firmware
  ☆29Updated 2 years ago
• DurandA / reflow946
  Bluetooth LE temperature controller for the 946C electronic hot plate
  ☆103Updated 9 months ago
• Expatria-Technologies / PicoBOB
  Low-cost and simple GRBLHAL to MACH3 BOB bridge for Raspberry Pi Pico
  ☆27Updated 10 months ago
• testudor / modular-breadboard-base
  Breadboard base with attachment slots for various modules
  ☆36Updated 2 years ago
• skerr92 / ice5lp4k_examples
  Examples for iCE5LP4K FPGA: BRAM, SPI, flash, DSP, and other basic examples
  ☆19Updated last year
• markusdd / EasyEDA_to_KiCAD_Lib_UI
  A nice egui UI in Rust which wraps JLC2KiCadLib
  ☆25Updated 3 weeks ago
• devbisme / WireIt
  KiCad PCBNEW plugin that lets you add wires between pads on a PCB, delete them, and swap wires between pads.
  ☆83Updated this week