maritime-labs / calypso-anemometer
Python driver for the Calypso Instruments Ultrasonic Portable Solar wind meter (UP10)
☆15Updated last year
Alternatives and similar repositories for calypso-anemometer:
Users that are interested in calypso-anemometer are comparing it to the libraries listed below
- Remote Control for an Evolution EV-1 Auto Pilot via NMEA2000/SeatalkNG.☆21Updated 3 years ago
- ultrasonic wind sensor with Arduino (atmega328) and stm32l4 sensor driver and arduino(esp8266/ESP32) web server interface☆13Updated 11 months ago
- repo for the Bee Data Logger☆59Updated this week
- Repository for the Tracker Relay using LoRa☆19Updated 3 years ago
- This repository shows how to build a NMEA2000 WiFi Gateway with voltage and temperature alarms.☆76Updated 3 years ago
- ☆63Updated this week
- ☆20Updated 3 weeks ago
- To measure temperature and barometric pressure with a BMP280 sensor and send it to NMEA2000 network.☆14Updated last year
- Sailor Hat for ESP32 hardware☆45Updated 3 months ago
- nmea2000 gateway with ESP32☆73Updated 2 months ago
- LoRaWAN implementation in MicroPython☆32Updated 5 years ago
- LoRa HAB Repeater☆39Updated 5 years ago
- Reads NMEA0183 messages from two serial lines and forwards multiplexed messages to USB-Serial and WLAN as UDP broadcast.☆11Updated 2 years ago
- Digital compass acting as B&G Precision 9 based on ESP32 and CMPS14☆18Updated 6 months ago
- TTGO T-Motion Tracker for TTN Mapper using EU (868 MHz) and US (915 MHz) frequencies☆15Updated 4 years ago
- HW and FW of a TinyGS 2.4 GHz LoRa ground station https://tinygs.com/☆25Updated 4 months ago
- This is the develoment space for a NMEA 2000 Voyage Data Recorder based on an ESP32 with CAN bus and SD card. The logger is using a SN65H…☆26Updated 3 years ago
- Statistics module for MicroPython☆15Updated 6 years ago
- bareboat-necessities.github.io - Web Site☆14Updated this week
- AcSIP S7XG LoRaWAN/GPS module library☆26Updated 5 years ago
- This repository shows how to use the M5Stack as NMEA 2000 Display and WiFi Gateway.☆37Updated 3 years ago
- Material für den NMEA2000-Workshop.☆37Updated last year
- An Arduino library to give environmental sensors a common interface of functions for use with Arduino-framework dataloggers, such as the …☆82Updated 3 weeks ago
- A display for the M5Stack connecting via JSON to the NMEA 2000 WiFi Gateway.☆16Updated 4 years ago
- Simplest DIY low power, low cost, standalone or web connected IOT sensors network framework using ESP32 or ESP8266 (no third party servi…☆45Updated this week
- An Arduino Library for direct (peer-2-peer) LoRa data communication from device to device without the need of LoRaWAN internet connectio…☆27Updated 4 years ago
- Interactive charting for LowPowerLab CurrentRanger: capture and share GIF animations with power state profiles/swings for IoT devices☆29Updated 4 years ago
- M5Stack Thermal Camera with AMG8833 thermal sensor. The connection between M5Stack & the sensor is I2C☆13Updated 6 years ago
- An ESP32 based gateway to send NMEA2000 PGNs to a SignalK server via WLAN or USB-Serial.☆21Updated 3 years ago