openplotter / openplotter-pypilotLinks
OpenPlotter app to integrate Pypilot in Raspberry Pi
☆20Updated 11 months ago
Alternatives and similar repositories for openplotter-pypilot
Users that are interested in openplotter-pypilot are comparing it to the libraries listed below
Sorting:
- Lysmarine is build with the stability of the raspbian operating system to provide an easy to use, stable, low-cost navigation computer fo…☆22Updated last year
- ☆21Updated 3 months ago
- A display for the M5Stack connecting via JSON to the NMEA 2000 WiFi Gateway.☆16Updated 4 years ago
- Main OpenPlotter app☆83Updated 3 months ago
- tinycore linux based distribution for raspberry pi to run pypilot☆14Updated 2 years ago
- Sailor Hat for ESP32 hardware☆46Updated 7 months ago
- opencpn pypilot plugin☆18Updated 6 months ago
- TTGO T-Watch 2020 v1 supporting Signal K features for displaying boat data and controlling devices on board.☆11Updated last year
- A powerful, inexpensive, and extensible tactical sailing computer☆14Updated 7 years ago
- GUI for showing messages from NASA PC NAVTEX USB☆10Updated 5 years ago
- Container Project for an Integrated Plugin Management Facility☆18Updated this week
- The open source hardware gateway for OpenPlotter☆29Updated last year
- An ESP32 based gateway to read NMEA0183 AIS messages and transform them to NMEA2000 PGNs.☆35Updated 2 years ago
- This is the develoment space for a NMEA 2000 Voyage Data Recorder based on an ESP32 with CAN bus and SD card. The logger is using a SN65H…☆26Updated 4 years ago
- Open-source electronics for your boat☆47Updated 5 years ago
- Remote control for anchor chain that shows current chain lengtht via WLAN to phone/tablet.☆16Updated 4 years ago
- This repository shows how to use the M5Stack as NMEA 2000 Display and WiFi Gateway.☆40Updated 3 years ago
- An Actisense NGT-1 compatible NMEA 2000 USB gateway for the SH-ESP32☆32Updated last year
- NMEA 2000 to Signal K transformer☆28Updated 3 weeks ago
- bareboat-necessities.github.io - Web Site☆14Updated 2 months ago
- To measure battery voltage, engine RPM, fuel level and exhaust teperature with an ESP32 and send it to a NMEA 2000 network.☆60Updated 3 years ago
- This repository shows how to build a Seatalk Autopilot Remote Control device based on an Arduino ProMicro and a simple 433 MHz KeyFob.☆67Updated last week
- This repository shows how to build a NMEA2000 WiFi Gateway with voltage and temperature alarms.☆80Updated 3 years ago
- An ESP8266-01 WiFi to read NMEA serial data and broadcast UDP to multiple openCPN instances as a Bridge☆32Updated 6 years ago
- Ionic v2 Mobile app to promote the use of Signal K, a modern and open data format for marine use. Signal K Mobile runs on iOS and Android…☆19Updated 7 years ago
- Inherited object for use NMEA2000 library for Arduino Boards with MCP2515 CAN bus controller.☆20Updated 4 years ago
- Teensy 3.1/3.2/3.5/3.6/4.0/4.1 boards CAN driver library for the NMEA2000 library☆12Updated last year
- Reads NMEA0183 messages from two serial lines and forwards multiplexed messages to USB-Serial and WLAN as UDP broadcast.☆13Updated 2 years ago
- Yacht-computer☆34Updated last year
- To measure temperature and barometric pressure with a BMP280 sensor and send it to NMEA2000 network.☆15Updated 2 years ago