Alternatives and similar repositories for open_niryo_one:

Users that are interested in open_niryo_one are comparing it to the libraries listed below

• NiryoRobotics / niryo_stepper
  ☆49Updated 6 years ago
• Roboteurs / rbx1-software
  Software to drive a 3D printed robot with a SlushEngine or other motor controller driver
  ☆28Updated 8 years ago
• bikerglen / robot-arm-v01
  ☆56Updated 7 years ago
• maxosprojects / dobot-arm-CAD
  dobot-arm CAD files
  ☆65Updated 8 years ago
• ftobler / robotArm
  Software for a 3D Printed Robot Arm
  ☆129Updated 4 years ago
• DizzyRobot / DirectServo
  Controller that drives BLDC motor as servo
  ☆75Updated 5 years ago
• 4ndreas / BetaBots-Robot-Arm-Project
  3d printable Robot arm
  ☆351Updated 3 years ago
• IS2511 / SCServo
  SCS/SMS servo library for Arduino [Not mine]
  ☆12Updated 3 years ago
• Chris-Annin / Annin-Robot-Project
  6 axis stepper motor robot
  ☆107Updated 6 years ago
• gouldpa / FOC-Arduino-Brushless
  Currently running saddle sinusoidal control. FOC requires 3 phase current feedback and the CLARKE & PARK transforms.
  ☆40Updated 4 years ago
• uStepper / uStepper-RobotArm-Rev3
  uStepper Robot Arm STL files and instruction Revision 3
  ☆88Updated 7 years ago
• jkirsons / stealth-controller
  ☆85Updated 3 years ago
• uStepper / Robot-Arm-Rev-4
  STL files and instructions for uStepper Robot Arm Rev 4
  ☆67Updated 4 years ago
• ongdexter / ar3_core
  Core software with ROS and MoveIt for the AR3 robotic arm
  ☆119Updated 3 years ago
• mjbots / pi3hat
  ☆41Updated last month
• deltaxrobot / Delta-X-Firmware
  Delta X Firmware will be open-source in March 2020
  ☆52Updated 3 months ago
• elkayem / ZippyTheBalancingRobot
  A 3D printed balancing robot
  ☆73Updated 7 years ago
• maxosprojects / open-dobot
  open-dobot - Open Firmware, Driver and SDK for Dobot Arm
  ☆142Updated 5 years ago
• Chris-Annin / ROS_AR2_moveit_config
  ROS moveit config files for the AR2 robot
  ☆16Updated 6 years ago
• uStepper / uStepper
  Repository for uStepper
  ☆98Updated 5 years ago
• ROBOTIS-GIT / OpenCR-Hardware
  BOM, Circuit and PCB Gerber of OpenCR
  ☆117Updated 4 years ago
• byDagor / Five_Bar_Parallel_Robot-Janus_Jr
  Janus Jr is a five-bar parallel robot designed to work with brushless motors, Arduino IDE and 3D printed parts.
  ☆22Updated 4 years ago
• T-Kuhn / DeltaPicker
  The Raspberry Pi & Arduino files for the DeltaPicker
  ☆20Updated 6 years ago
• jesseweisberg / moveo_ros
  ROS packages and Arduino scripts that can be used to control the BCN3D Moveo robotic arm in simulation and real-life.
  ☆314Updated last year
• JoLamMaker / ThisArm_Firmware
  G-code enabled firmware for Robot Arms
  ☆32Updated 3 years ago
• gouldpa / Triple-Cycloidal-Robot-Arm-Proto-2
  ☆21Updated 5 years ago
• frankjoshua / rosserial_arduino_lib
  ☆60Updated 7 months ago
• makerbase-motor / MKS-ESP32FOC
  ☆39Updated 4 months ago
• andresaraque / centauri6dof
  Manipulator robot based on BCN3DMOVEO with 6 degree of freedom (DOF) and user interface (GUI)
  ☆57Updated 4 years ago
• 4ndreas / Mantis-Robot-Arm
  3d printable Robot arm
  ☆40Updated 7 years ago