Alternatives and similar repositories for elm329

Users that are interested in elm329 are comparing it to the libraries listed below

• jsphuebner / stm32-car
  Very hacky project that talks to the Nissan Leaf BMS (aka LBC) and to the VW CAN bus
  ☆61Updated 6 months ago
• rnd-ash / ultimate_nag52
  An open source TCM for Daimlers 722.6 gearbox. Resource repository
  ☆118Updated last year
• autowp / CANreader
  Android CAN client
  ☆63Updated 8 years ago
• rusefi / hw_microRusEfi
  microRusEfi board for rusEfi ECU
  ☆83Updated last month
• abhishekoct18 / allpro
  Open-source ELM327 OBD adapter
  ☆38Updated 9 years ago
• ARoozitalab / ELM327-OBDII-STM32
  this src using stm32f103 as data converter for OBD . support 9141-2 ,15765
  ☆143Updated 6 years ago
• Autohome2 / dxControl-Gears
  ☆22Updated 7 years ago
• Hell-Fire / WidebandO2
  An Arduino sketch for controlling a Bosch LSU 4.9 Wideband Lambda sensor with minimal parts
  ☆82Updated 12 years ago
• latonita / arduino-canbus-monitor
  Can bus monitoring tool based on arduino and can bus shield. Implements CAN ASCII/SLCAN protocol compatible with Lawicel CAN232/CANUSB. C…
  ☆326Updated last week
• domnulvlad / KLineKWP1281Lib
  Arduino / ESP / RPi Pico library integrating the proprietary VAG Key-Word 1281 protocol (KWP1281/KW1281)
  ☆62Updated 11 months ago
• handmade0octopus / ds2
  DS2 K-line library for Arduino and ESP32
  ☆52Updated 6 months ago
• robinpipirs / stm32f746-canbus-display
  ☆17Updated 3 years ago
• fpoussin / MotoLink
  K-line/Serial/CAN interface and fuel mapper for motorcycles.
  ☆90Updated 5 years ago
• martinhol221 / ISO14230-4-KWP
  Reading the K-line of the bus according to ISO 14230-4 KWP 10.4 Kbaud
  ☆26Updated 5 years ago
• JacekGreniger / stm32-vagcanlogger
  VAGCANLOGGER - KW1281 & VW TP 2.0
  ☆33Updated 11 years ago
• omarKmekkawy / Arduino_CANHacker
  This repo for using your Arduino with MCP2515 CAN Interface and CANHacker software
  ☆55Updated 4 years ago
• turboat / eepromtool
  ☆51Updated 2 years ago
• TheBigBadWolfClub / GTTurboEcu
  Arduino ODBII ELM327 Emulator - Allows Arduino to act as an OBD2 ELM327 device and responde to PID requests
  ☆67Updated 2 years ago
• corygrant / CANBoard_HW
  Hardware - CAN enabled small input / output expansion board. Switch panels, steering wheel buttons/knobs, etc.
  ☆44Updated 2 months ago
• smartgauges / obd2-bt-stm32
  Firmware for the cheapest can sniffer
  ☆38Updated last year
• HeinrichG-V12 / E65_ReverseEngineering
  ☆44Updated 3 years ago
• rusefi / rusefi_documentation
  User documentation for rusEFI engine control unit
  ☆41Updated this week
• dvjcodec / SCG-ECU-2.0-STM32F407-8x8
  Standalone ECU designed for Speeduino and RusEFI firmware.
  ☆50Updated last year
• xerootg / esp32_tp20_datalogger
  VW TP 2.0 Datalogger for the ESP32
  ☆20Updated 2 years ago
• damienmaguire / Nissan-Leaf-Inverter-Controller
  OpenSource Control Unit for the Nissan Leaf Gen 1 and Gen 2 inverter
  ☆61Updated 4 years ago
• macchina / LIN
  Arduino library to add dual LIN support on SAM3X based boards with a TJA1021/TJA1027 transceiver
  ☆117Updated 6 years ago
• coniferconifer / ESP32-ECU-emulator
  ECU emulator by ESP32 with TJA1050 for OBD2 print test
  ☆60Updated last year
• mck1117 / wideband
  ☆61Updated 2 weeks ago
• jsphuebner / inverter-hardware
  Eagle schematics of inverter main board, sensor boards and gate drivers
  ☆72Updated 3 years ago
• corygrant / dingoPDM
  Hardware - dingoPDM is an open source, affordable automotive PDM (Power Distribution Module). Pre-assembled and tested units are availabl…
  ☆89Updated 3 weeks ago