lfarcaro / ARINC653_ARMV7A_Z7000Links
Real-Time Operating System (RTOS) for Xilinx Zynq-7000 Cortex-A9 (ARMv7-A) multi-core SoCs (ZedBoard, PicoZed, MicroZed and similars) based on the ARINC 653 Part 1 specification
☆12Updated last year
Alternatives and similar repositories for ARINC653_ARMV7A_Z7000
Users that are interested in ARINC653_ARMV7A_Z7000 are comparing it to the libraries listed below
Sorting:
- Xilinx Zynq SoC based all-in-one quadrocopter flight controller. Stereo 720p side-by-side digital video transmission.☆15Updated 4 years ago
- A motor control application running in Patmos using the Altera Power Board☆10Updated 9 years ago
- Yet Another XC7Z010 Board☆17Updated 3 years ago
- 4-Layer XC7Z010 DDR3 Layout☆17Updated 3 years ago
- Eurobot 2019 robot's firmware☆10Updated 5 years ago
- Open Hardware carrier board supporting modules with Zynq 7000 All Programmable SoC devices.☆58Updated last year
- SpaceVNX (VITA 74.4) carrier based on Zynq-7000.☆13Updated 2 years ago
- ☆32Updated 2 years ago
- 96Boards camera support from Deltavison :☆41Updated 7 years ago
- Converter from Allegro to KiCad, and Allegro extract viewer☆11Updated 5 years ago
- Absolute encoder VHDL core☆20Updated 8 years ago
- Firmware for Infinity brushless motor controllers☆24Updated 4 years ago
- servo motor control with FPGA☆10Updated 9 years ago
- ros nodes on stm32 board with nuttx, a fork of ros2☆23Updated 8 years ago
- This github contains the Vivado project, PCB schematic and control software for levitation framework at Bristol University☆14Updated 7 years ago
- Official micro-ROS RTOS☆90Updated 3 years ago
- Camera board with a pair of OmniVision OV9281 sensors☆59Updated last year
- GMSL2 deserializer with MIPI CSI-2 output☆18Updated 3 months ago
- ☆14Updated 2 years ago
- Hardware implementation of control algorithm for three phase voltage inverters. Implemented using Verilog and MATLAB. Tested with an impl…☆21Updated 5 years ago
- Zubax Orel BLDC motor controller☆10Updated 6 years ago
- CadenceLib，orCAD,Allegro☆10Updated 5 years ago
- Firmware, schematic and board drawings for the CANine USBC↔︎CAN adapter☆11Updated last year
- Hardware design files for BLDC servo controller☆15Updated 2 years ago
- Single-header, lightweight convolutional neural network library written in C++ for Raspberry Pis.☆50Updated 6 years ago
- CVRA monorepo - All software running on our bots lives here☆45Updated last year
- Open Source Layouts, Footprints, Schematics, Libraries, ... for Cadence Products☆12Updated 2 years ago
- PCB designs for the University of Waterloo Robotics Team☆90Updated last month
- A Platform for Digital Real-Time Control.☆15Updated 12 years ago
- Firmware to implement USB communications on the CH32V307 microcontroller☆11Updated 2 years ago